General Civic Talk Talk about the Honda Civic generally here.

help!!!!!!

Old Apr 20, 2007 | 10:32 AM
  #1  
eg101's Avatar
Thread Starter
Joined: Apr 2007
Posts: 18
From:
Default help!!!!!!

i have a 93 eg hatch with a d15b7 and i want to keep that egine just cuz not many people do and get as mutch power out if it as i can i allready have a full custom exhaust and an aem short ram air intake and i was wondering what to do next cuz i am kinda on a tight buget so if anyone could help me out that would be great and the car is super fresh 113,857 miles on engine inside the car is so clean and the egine is so clean that you could eat off it lol
 
Old Apr 20, 2007 | 10:56 AM
  #2  
that guy's Avatar
HCF Member
Joined: Mar 2007
Posts: 600
From: Central Ohio
Default RE: help!!!!!!

I would say that now is the time where you start saving your pennies. I'm not as familiar with the D15B7, but if it's non-vtec SOHC, you could find the head from a vtec and putting it on your non-vtec block. I suggest trying to find a head from a D15Z1, which was the vtec model engine for that year range of Del Sol. That should give you a little power. Other than that, look in the tips and tricks section. Also start thinking about boosting your engine.

Do a search on mini-me conversions with the search feature of this site. Also, buy a hayne's manual if you don't already have one. you'll need it...
 
Old Apr 20, 2007 | 11:04 AM
  #3  
FlipHKD720's Avatar
HCF Member
Joined: Mar 2006
Posts: 8,442
From: Marquette, MI
Default RE: help!!!!!!

no need to post the same question twice......

Mods, delete oneof these?
 
Old Apr 23, 2007 | 10:01 AM
  #4  
eg101's Avatar
Thread Starter
Joined: Apr 2007
Posts: 18
From:
Default RE: help!!!!!!

i got a t3 t4 hybrid turbo but i need to beef up the engine before i put it on
 
Old Apr 23, 2007 | 10:30 AM
  #5  
the_turtle's Avatar
HCF Member
Joined: Nov 2006
Posts: 1,282
From:
Default RE: help!!!!!!

ORIGINAL: eg101

i got a t3 t4 hybrid turbo but i need to beef up the engine before i put it on
easier said than done...and if your on a tight budget....start saving. its a little more complicated than just bolting on your turbo...theres A TON of other things you have to do before and during your install. (pipes, wires, couplers etc.)
 
Old Apr 23, 2007 | 02:21 PM
  #6  
ELECTRON BLUE 2000's Avatar
Joined: Mar 2007
Posts: 131
From: hia
Default RE: help!!!!!!

could also start simpler than that... cai/ or a jdm header/ a tune for sure the vtec head... computer... or f*** it boost it and save ur pennies buddy
 
Old Apr 25, 2007 | 01:46 PM
  #7  
eg101's Avatar
Thread Starter
Joined: Apr 2007
Posts: 18
From:
Default RE: help!!!!!!

i got a full exhaust and aem short ram intake but i have a turbo for it but dont have it on yet
 
Old Apr 25, 2007 | 01:47 PM
  #8  
eg101's Avatar
Thread Starter
Joined: Apr 2007
Posts: 18
From:
Default RE: help!!!!!!

i have a turbo for it but dont know what i got to do to put it on you got any ideas ?
 
Old Apr 25, 2007 | 04:41 PM
  #9  
that guy's Avatar
HCF Member
Joined: Mar 2007
Posts: 600
From: Central Ohio
Default RE: help!!!!!!

use the search feature of this site to find what you need.
 
Old Apr 27, 2007 | 01:12 PM
  #10  
eg101's Avatar
Thread Starter
Joined: Apr 2007
Posts: 18
From:
Default RE: help!!!!!!

what would you sugest to do to my engine internly to make the turbo bework on that engine i know i have some more turbo stuff to buy still but i am saving for that and the rest of the stuff i need
 

Thread Tools
Search this Thread

All times are GMT -8. The time now is 06:05 AM.