General Civic Talk Talk about the Honda Civic generally here.

Power door locks! Yay!

Old Feb 3, 2007 | 02:12 PM
  #1  
Carlz0r's Avatar
Thread Starter
|
HCF Member
Joined: Nov 2006
Posts: 320
From: Vernon, BC, Canada
Default Power door locks! Yay!

So, I started working on rewiring all my speakers with 16 gauge wire this morning. I finished the rears, and when I started removing the door panels for the front speakers, a yellow glint caught my eye. When I finished removing a panel, I saw that the previous owner had mounted power door lock actuators ready for wiring! Now I just have to figure out how to wire them up to the alarm system (that I also didn't know about until about a week after I bought the car). If anyone here has installed a Clifford alarm and has/knows the wire color codes or could possibly even email me a copy of an install manual for a Cyber 5, that'd be perfect.
 
Old Feb 4, 2007 | 03:40 AM
  #2  
Red Hot Rider's Avatar
HCF Member
Joined: Sep 2006
Posts: 246
From:
Default RE: Power door locks! Yay!

http://www.clifford.com/main.asp

conctact clifford yourself, and request the manual. Owner's manual is right online, but doesn't include anything about install.
 
Old Feb 4, 2007 | 05:21 AM
  #3  
windcalmer's Avatar
HCF Member
Joined: Oct 2005
Posts: 4,509
From:
Default RE: Power door locks! Yay!

Check out the12volt.com . They have tons of info on alarms, stereos, and anything 12 volt. I have been a member there for longer than I have here. Good Luck.
 
Old Feb 4, 2007 | 08:18 AM
  #4  
patto_001's Avatar
Joined: Dec 2006
Posts: 300
Default RE: Power door locks! Yay!

Well.. maybe we should all double check our doors
 
Old Feb 4, 2007 | 04:13 PM
  #5  
addiction2bass's Avatar
Recognized HCF Member
Joined: Jun 2006
Posts: 11,203
From: Brownsburg, IN 46112
Default RE: Power door locks! Yay!

most likely the door locks are reverse polarity as most aftermarkets are...
preaty easy to wire with 2 12volt relays..
http://www.the12volt.com/ssi/getimag...atorrevpol.gif


 
Old Feb 4, 2007 | 07:28 PM
  #6  
Carlz0r's Avatar
Thread Starter
|
HCF Member
Joined: Nov 2006
Posts: 320
From: Vernon, BC, Canada
Default RE: Power door locks! Yay!

ORIGINAL: Red Hot Rider

http://www.clifford.com/main.asp

conctact clifford yourself, and request the manual. Owner's manual is right online, but doesn't include anything about install.
Clifford doesn't give out install manuals unfortunately. Like DEI, they only sold alarms as installed packages through licensed install shops. As for being reverse polarity, yes they are.

EDIT: Found a diagram!
 
Old Feb 4, 2007 | 08:16 PM
  #7  
addiction2bass's Avatar
Recognized HCF Member
Joined: Jun 2006
Posts: 11,203
From: Brownsburg, IN 46112
Default RE: Power door locks! Yay!

if you cannt find a instal sheet for the alarm... try to go check out best buy or circuit city... which ever places sells that brand....
and go talk to the instal bay guys and see if they can print ya out a instal sheet.......
may slip em a 20 or something for thier time if they are busy or hesitant..

i know the shop guys at the best buy im around were preaty cool.... they had a set of wires shiped over from another store for my old alarm system that i had instaled and didnt need the wires at that time that they instaled my old alarm system...

 
Old Feb 4, 2007 | 09:54 PM
  #8  
Carlz0r's Avatar
Thread Starter
|
HCF Member
Joined: Nov 2006
Posts: 320
From: Vernon, BC, Canada
Default RE: Power door locks! Yay!

ORIGINAL: addiction2bass

if you cannt find a instal sheet for the alarm... try to go check out best buy or circuit city... which ever places sells that brand....
and go talk to the instal bay guys and see if they can print ya out a instal sheet.......
may slip em a 20 or something for thier time if they are busy or hesitant..

i know the shop guys at the best buy im around were preaty cool.... they had a set of wires shiped over from another store for my old alarm system that i had instaled and didnt need the wires at that time that they instaled my old alarm system...

Well, I found some install diagrams already (for free) so I'm happy now. Just gotta wire it all up this weekend.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hondacivic
The Lounge
2
May 5, 2008 02:27 PM
SI_smiley07
General Civic Talk
4
Aug 8, 2007 08:53 AM
coolazguy
Mechanical Problems & Technical Chat
0
Jul 11, 2005 07:24 PM
chulo31
General Civic Talk
1
Apr 11, 2005 05:38 PM
Expando1
Mechanical Problems & Technical Chat
2
Sep 21, 2004 12:19 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 07:56 AM.