Header, Intake, & Exhaust Custom Exhaust? New Headers? Need Opinions on Intakes? Discuss making your ride breathe better here.

need input

  #1  
Old 07-03-2008, 02:41 PM
shikaka's Avatar
Junior Member
Thread Starter
Join Date: Jun 2008
Location:
Posts: 19
Default need input

okay got a question bout my exhaust setup.....i have an aem cai and a dc header....from the header i have 2.25 in piping to the cat....from catback i have 2in piping to a stock muffler (no resonator).... Is there anything wrong with this setup as far as losing performance...this is how i bought the car and it sounds good
 
  #2  
Old 07-03-2008, 04:03 PM
omgftw's Avatar
Junior Member
Join Date: May 2008
Posts: 11
Default RE: need input

You should be fine.
Dont go any bigger on the piping.
If you want a little bit more horsepower; nothing drastic,
get a hi-flow cat and a aftermarket muffler.
 
  #3  
Old 07-03-2008, 10:47 PM
trustdestruction's Avatar
Moderator
Join Date: May 2007
Location: FL
Posts: 11,417
Default RE: need input

^+1 to the Get a high flow cat and an aftermarket muffler. I recommend an Apex-i WS2 muffler. I have one and it's great. Not too loud, not too quiet. And it's not a fart can. I recommend for hi flow cat a magnaflow direct fit catalytic converter. It can be found at partstrain.com or summitracing.com

2" piping should be fine. If you got the money, buy a catback exhaust instead of just the muffler and it'll probably have 2.25" piping and a resonator.

ORIGINAL: omgftw
Dont go any bigger on the piping.
really you'd probably want to have 2.25". IDK why you say to not go bigger.
 
  #4  
Old 07-05-2008, 04:20 PM
shikaka's Avatar
Junior Member
Thread Starter
Join Date: Jun 2008
Location:
Posts: 19
Default RE: need input

thanks for the replys i'll be on the lookout for a good deal on the high flow cat.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
aznxboi19
The Lounge
4
10-09-2005 05:44 PM
Saltyhatch
Mechanical Problems & Technical Chat
2
09-14-2005 05:29 AM
DxHatchbackCivic
General Civic Talk
1
07-28-2005 10:14 PM
SkyBreaker
Inside and Out
3
05-03-2005 08:41 PM
Pete
Audio/Visual & Electronics
5
04-21-2005 10:03 PM


Thread Tools
Search this Thread
Quick Reply: need input



All times are GMT -8. The time now is 07:14 PM.