bad grounds?

 

I checked those first. and they all seem to be good. so idk. i started classes this week, so hopefully this weekend i wont have much work and can do it.

 

What are you using for a power source for your led's overurhead?

 

I'm useing one of the spare slots in the fuse box under the dash.

 

I wonder if you may be running too many lights on the same circuit. are they wired in series and what size fuse are you using? By the way vilex nice job on the install, it looks killer.

 

they are wired in parallel. and i dont remeber off the top of my head. ill check when i try and redo it all this weekend.

 

leds dont use much power at all. ive had 12 foot of leds wired up to a tiny 5 or 10amp fuse and it never blew. i also had about 6 dual 12inch cold cathodes also on the fuse.

if they are not prewired leds then the metal tabs might be touching each other making a direct short.... easiest thing to do would be get one set of leds and cut the power or ground wire off that end and if the other lights work... ur shorts in that section... if it still blows the fuse then its in the leds that are still wired up... alittle cuting and testing and youll be able to find the problem spot easy enough.

 

yeah its all from oznium, its 6 leds in the cup holders 4 in the vents and just one dual 12inch cold cathode for the foot wells on one fuse.

 

prewired leds or did ya solder up your own to save a few bucks?

 

prewired. jjust less to do for the install.