well here it is.... i did have the whole taillights tinted.... but after having alot of people run up on me i decided to change it up alittle...

cause the lower section is completly clear.... i still have my backup lights and a clear line for my turn signals so HOPEFULLY no one will run up on my @ss anymore.LMFAO
BUT i still have 2 more options to do which i will do eventualy..
1 drilling holes into the stock lower housing and put in a bunch of these pre-wired superflux 4-chip LED
and put some red ones in thier to realy light it up nicely... that way people could still see my red brake lights still

also using a few of these white superflux leds in my 3rd brake light...
which should make it realy nice and visable for no worries!!!!!!!
http://www.oznium.com/prewired-superflux

short video of me playing with one of those white superflux leds
http://s40.photobucket.com/albums/e2...lights2011.flv

also got rid of the raised letting for a beter look
almost gone


and its all gone..


and back to stock lights.


o lets take a BEFORE picture




next post will be with the passenger side redone how i like it... just waiting for them to upload... photobucket is being realy slow right now....

 

and fully tinted side...


i think it looks ALOT BETER.. and even safer
now i just have to do the other side.LMFAO
BUT i need more spray tint!
http://store.summitracing.com/partde...p;autoview=sku
if anyone is interested in trying themselves... this is the ONLY TINT STUFF YOU SHOULD USE! its VERY NICE STUFF!!!!!







i also put on my front and rear 6ft FLEXleds

very nice... well i like this camera candle setting.LMFAO looks super bright....


and BEFORE i swaped the old cold cathodes for these strips...



tho the led strips cost ALOT MORE BUT they are perfectly... cause they are fully flexable.... and also fully water proof!!!!
notice the side tubes which are still in cold cathodes.. but as you can see thiers a few either shorting out and some with clearly about to burn out or damaged

those will be replaced with these long @ss ledflex strips! i just need to save up alittle more money... but they are well worth the extra money!

i had ruffly 100bucks in my old cold cathode setup not including all the silicone and channeling to hide the bubls along with alot of zip ties.LOL
this flexled strips i figure ill have about 250bucks in them once i buy them all... maybe alittle more but not over 300bucks tho..
and then ill have the peace of mind and never have to worry about breaking any tubes... and never have to worry about water ever again either
i gotta buy a few more led strips to put them over my rims as well

love these things

 

Nice, I like the Tint/Clears alot. The leds are pretty cool, and damn bright lol. Looks good man.

 

Man, the tint/clear lights looks sweet! I like it.

 

thanks.... hopefully shiping will be super fast like the first time and ill be able to redue them this weekend while im off

i also have to buy abunch of those red superflux leds....
i also want to try and light up that center inner section.... dont know why thats not lighted.....

 

looks siick, lol how many times have you done them over already?

 

LMFAO


well ive sanded off the tint off the inner tails twice from previous ULTIMATE CRAP tint off ebay....
then this time sanding the whole set... and another 2 sanding for these cause i ran the paint.LOL


just ordered 2 extra cans of the the nightshade tint
and just ordered 12 red superflux leds.



lets just say this next time i tint the taillights im gonna cover all the posible problems before they start.LFMAO
im tired of sanding these taillights.LOL

 

i like it but i think theit looks better when the white part is left untinted, lol and i know how ya feel i ran out of spray tint also man $25 a bottle [:@]

 

ya im leaving the clear lower section clear... thats my updated version of them

 

how do you take the tint off? can you just use paint thinner?