The Lounge This section is for the most off topic of OT posts. although the lounge is moderated, whoring is permitted.

Get the car back today!!!

Old Jun 5, 2006 | 02:15 PM
  #1  
Chimera02EX's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2005
Posts: 2,501
From:
Default Get the car back today!!!

Well the emissions and inspection is done, it is running well (not perfect yet) gonna have to drive it around for a while and make sure no CEL's or other problems arise. I started doing a write up on it but it's gonna take me a while to finish it. I'll keep ya posted.
 
Old Jun 5, 2006 | 02:17 PM
  #2  
Remmy's Avatar
HCF Member
Joined: Jan 2005
Posts: 11,248
From: Charleston
Default RE: Get the car back today!!!

Cant wait for the write up. So I guess it passed?
 
Old Jun 5, 2006 | 04:46 PM
  #3  
Chimera02EX's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2005
Posts: 2,501
From:
Default RE: Get the car back today!!!

It passed bc PA doesn't do tailpipe emmissions, and bc I'm good friends w/ the mechanic. Yeah so driving it home... yeah still got problems... couple CEL's, no throttle response at times, will idle at 2.5k for no reason then drop back down when I step on the gas a bit...

Regardless to say I'm frustrated... I feel defeated... I may try tomorrow to work on it some more.

Checked all the engine codes, nothing too big, should have it running tomorrow without problems.
 
Old Jun 5, 2006 | 08:07 PM
  #4  
Peg_Leg's Avatar
Stinky Administrator
Joined: Feb 2006
Posts: 11,121
From: Somewhere
Default RE: Get the car back today!!!

cool glad you got it to pass good luck
 
Old Jun 5, 2006 | 08:24 PM
  #5  
Nail I3unny's Avatar
HCF Member
Joined: Mar 2005
Posts: 7,702
From:
Default RE: Get the car back today!!!

you checked yoru gaskets already for the high idle problem didnt you?
 
Old Jun 5, 2006 | 09:00 PM
  #6  
Chimera02EX's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2005
Posts: 2,501
From:
Default RE: Get the car back today!!!

Gaskets are definately not the problem, the code I read that I believe was causing that problem was a PCV leak.
 
Old Jun 5, 2006 | 09:05 PM
  #7  
riceburner700's Avatar
Recognized HCF Member
Joined: Jan 2005
Posts: 6,629
From: Loveland CO
Default RE: Get the car back today!!!

aw damn man pcv valves are cake to clean or replace
 
Old Jun 6, 2006 | 07:18 AM
  #8  
Chimera02EX's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2005
Posts: 2,501
From:
Default RE: Get the car back today!!!

I don't even think I'm gonna have to replace it or clean it, I think it's the hose going to the IM from the PCV, it's not clamped on the PCV side so I"m gonna try that and see what happens.
 
Old Jun 6, 2006 | 12:09 PM
  #9  
Chimera02EX's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2005
Posts: 2,501
From:
Default RE: Get the car back today!!!

Ok so it seems like I've got the high rpms nice, but I"m still having trouble below 3500-4k, sounds like it's misfiring, it could possibly be timing, I may have knocked that off a tad when I attempted to replace the pulleys on my own...

Gonna go and mess w/ it a bit more then take it for a drive and see what happens...
 
Old Jun 6, 2006 | 02:43 PM
  #10  
hondaracer05's Avatar
Joined: Dec 2005
Posts: 1,055
From: new mexico, then mt, then alaska, now mt again...
Default RE: Get the car back today!!!

mine missfires/has little throttle response at times, but that cause it neds new plugs, wires, rotor...etc. and a good oil change!!! but that and anyother prob. will be taken care of, seeing as im grouinded from my car till 4th of july!!! got my # 8 ticket a few days back, 4th for speeding...so... good luck with your car, hope you figure your problems out!!!
 

Thread Tools
Search this Thread

All times are GMT -8. The time now is 03:19 AM.