The Lounge This section is for the most off topic of OT posts. although the lounge is moderated, whoring is permitted.

haynes manual translated

Thread Tools
 
Search this Thread
 
Old Mar 4, 2007 | 08:01 PM
  #1  
mill$civic's Avatar
Thread Starter
|
HCF Member
Joined: Feb 2005
Posts: 8,469
Default haynes manual translated

haynes manual translated [/align][hr]

Haynes: Rotate anticlockwise.
Translation: Clamp with visegrips then beat repeatedly with hammer counterclockwise.

Haynes: This is a snug fit.
Translation: You will skin your knuckles!

Haynes: This is a tight fit.
Translation: Not a hope in hell, bucko!

Haynes: As described in Chapter 7...
Translation: That'll teach you not to read through before you start;now you are looking at scary photos of the inside of a gearbox...

Haynes: Pry...
Translation: Hammer a screwdriver into...

Haynes: Undo...
Translation: Go buy a BIG can of WD40...

Haynes: Retain small spring...
Translation: "Jeez what was that, it nearly took my eye out!"

Haynes: Press and rotate to remove bulb...
Translation: "OK - that's the glass part off, now use some good pliers to dig out the base...

Haynes: Lightly...
Translation: Start off lightly and build up till the veins on your forehead are throbbing...

Haynes: Routine maintenance...
Translation: If it isn't broken... it's about to be!

Haynes: One spanner rating.
Translation: Your mother could do this... so how did you manage to botch it up?

Haynes: Two spanner rating.
Translation: Now you may think that you can do this because two is a low, tiny, little number... but you also thought the wiring diagram
was a map of the Tokyo underground.

Haynes: Three spanner rating.
Translation: OK - but don't expect us to ride in it afterwards!

Haynes: If not, you can fabricate your own special tool like this...
Translation: Hahahahahahahahahahahahahahahahahahahahahaha!

Haynes: Compress...
Translation: Squeeze with all your might, jump up and down on, swear at, throw at the garage wall, then search in the dark corner of the
garage for while muttering "Piece of Sh@t" repeatedly under your breath.

Haynes: Inspect...
Translation: Squint at really hard and pretend you know what you are looking at, then declare in a loud knowing voice to your wife, "Yep,
as I thought, it's broke!"

Haynes: Carefully...
Translation: You are about to cut yourself.

Haynes: Retaining nut...
Translation: Yes, that's it, that big spherical blob of rust.

Haynes: Get an assistant...
Translation: Prepare to humiliate yourself in front of someone you know.

Haynes: Turning the engine will be easier with the spark pugs removed.
Translation: However, starting the engine afterwards will be much harder. Once that sinking pit of your stomach feeling has subsided,
you can start to feel deeply ashamed as you gingerly refit the spark plugs.

Haynes: Refitting is the reverse sequence to removal.
Translation: But you swear in different places.

Haynes: Prise away plastic locating pegs...
Translation: Snap off...

Haynes: Using a suitable drift...
Translation: The biggest nail in your tool box isn't a suitable drift!

Haynes: Apply moderate heat...
Translation: Placing your mouth near it and huffing isn't moderate heat.

Haynes: Standard tool kit
Translation: Cell phone and a AAA card.

Haynes: Index
Translation: List of all the things in the book but the thing you want to do![/align]
 
Old Mar 4, 2007 | 08:06 PM
  #2  
Tater's Avatar
HCF Member
Joined: Jun 2006
Posts: 1,726
From: sterling heights MI
Default RE: haynes manual translated

lol
 
Old Mar 4, 2007 | 08:07 PM
  #3  
No_iD's Avatar
Joined: Jan 2007
Posts: 168
From:
Default RE: haynes manual translated

Hahathat is funny because I was just using the Haynes manual earlier and that is what it felt like!
 
Old Mar 4, 2007 | 08:09 PM
  #4  
Peg_Leg's Avatar
Stinky Administrator
Joined: Feb 2006
Posts: 11,121
From: Somewhere
Default RE: haynes manual translated

bawahahahahahaha that is so true all of it
 
Old Mar 4, 2007 | 08:23 PM
  #5  
skateman190's Avatar
HCF Member
Joined: Jul 2006
Posts: 1,485
From:
Default RE: haynes manual translated

hahahahaha, i love it! try an army tm, lol
 
Old Mar 4, 2007 | 08:44 PM
  #6  
sandrider123's Avatar
HCF Member
Joined: Nov 2005
Posts: 1,321
From:
Default RE: haynes manual translated

Funny I was just using it as well, tlak about a joke
 
Old Mar 4, 2007 | 08:58 PM
  #7  
natecivic92's Avatar
HCF Member
Joined: Dec 2005
Posts: 1,707
From: Carmi,Illinois
Default RE: haynes manual translated

Thank god for the pic's in the manual.Good post very funny.
 
Old Mar 4, 2007 | 09:08 PM
  #8  
drbyers's Avatar
HCF Member
Joined: Oct 2005
Posts: 4,371
From:
Default RE: haynes manual translated

haynes = worthless.

helms manuals pwn...
 
Old Mar 4, 2007 | 09:09 PM
  #9  
Mr Mobsta Man's Avatar
HCF Member
Joined: Jun 2006
Posts: 3,086
From: West Virginia
Default RE: haynes manual translated

I had to stop reading that a few times because I was laughing too hard.[sm=lol.gif][sm=lol.gif]
 
Old Mar 5, 2007 | 12:14 AM
  #10  
WhiteRabbit1021's Avatar
HCF Member
Joined: Dec 2006
Posts: 2,459
From:
Default RE: haynes manual translated

Haynes: Prise away plastic locating pegs...
Translation: Snap off...


I know all you civic owners can agree with that. Stupid little plastic screws. WHO MAKES A SCREW OUT OF PLASTIC!?!
 



All times are GMT -8. The time now is 03:20 PM.