Ok, when I did my engine swap last fall I didn't hook the AC all back up, now that it's getting warm I need to get it going. The issue is there is one wire that goes from the compressor to the condenser ( i think). It pulled out before I realized that I missed it when I was pulling my engine, so I need to get it put back where it goes, but I cant tell when it goes. Any help would be great. Thanks

 

If you have a single wire to the compressor, it comes from the A/C harness on the condenser to the thermal protector on the compressor and then across the top of the compressor body to the clutch coil.