So ive done a b swap in my 93 del and my question is do i have to change the front knuckles or any thing being how as though it was a d

 

Ok i have a big question. i did the b swap and there is a transmissoin mount on the front of the tranny and on the tegs there is a cross member that it mounts to but on my del sol there isnt. what should i do. plus there is a plug on the front side of the tranny that idont know what it is. its a b16 trans if that makes a difference. but i believe its only 2 wires

 

ok someone please help. i need a front cross member to mount my transmission on and i dont know what to use or to take it out of. its a 93 del sol can i just use a coupe or what?

 

welll guessing its a older b motor, as long as the motor has the driver top, rear and passenger top you are fine, you can also use the a/c mount like your old motor. but will need to be from a newer model b

 

ok thanks. ya i have them all but that one. its obd1 motor and trans but i just got it rebuilt and made it a little better and a little more power lol. from what i could gather from what i did ppl say its a slightly built type R motor.