Installing OEM FOG LIGHTS
ORIGINAL: voz
LEV i have a 95 ex i think its an EG... please talk me through this... im about to just wire them to parking lights and call it a day but i would like it to work like intended...
LEV i have a 95 ex i think its an EG... please talk me through this... im about to just wire them to parking lights and call it a day but i would like it to work like intended...
I like them running with the parking lights, that way when I just turn on the pl they are on. I am looking to get yellow bulps for them too now, its too hard to match hyper white to hyper white.
My girl got them in a whole kit that came with everything even the switch that goes directly in the dash off eBay for about 80 bucks I belive. Im not 100% sure on that price, but it was something she really wanted for the car so there they are.
There was a male spade in the fuse box under the dash that is pl that I used. You can also tee it into the red/black wire coming out of the box above the fuses also that is pl.
There was a male spade in the fuse box under the dash that is pl that I used. You can also tee it into the red/black wire coming out of the box above the fuses also that is pl.
aigt..
i have not attempted it yet...but wwhen i hooked everything up like destruction said no workie..but we knew that right... but harnes that comes inside of car is just a ground, two orange ones the are connected to a plug that plugs right above the fuses, can i use any of these orange ones to make it work?.. or do i have to run my own wires?... can i tap into the exsisting pl at the bumper? or do i have to run wires into the car...
how much easier would it be if any if i was to try to get them to work the way they intended them to be via dash mounted OEM looking switch?...
i know i ask alot but thats why i look to you seasoned vets to HABU
i have not attempted it yet...but wwhen i hooked everything up like destruction said no workie..but we knew that right... but harnes that comes inside of car is just a ground, two orange ones the are connected to a plug that plugs right above the fuses, can i use any of these orange ones to make it work?.. or do i have to run my own wires?... can i tap into the exsisting pl at the bumper? or do i have to run wires into the car...
how much easier would it be if any if i was to try to get them to work the way they intended them to be via dash mounted OEM looking switch?...
i know i ask alot but thats why i look to you seasoned vets to HABU



