Proper parts for front license plate holder
#1
10-05-2011, 01:52 PM
Proper parts for front license plate holder
Hi, guys,
I just bot a used 2005 civic hybrid (gen. 7, I believe). Anyway, it came with no front license plate holder (the plate was pathetically screwed in with drywall screws - good way to loose your front plate).
I found this old thread where a guy was getting the front plate holder for an accord, and I found a similar diagram for the 2005 civic hybrid A-CVT.
I'm guessing I need part 7, two 28-s and two 33-s. Can anyone confirm this?
I just bot a used 2005 civic hybrid (gen. 7, I believe). Anyway, it came with no front license plate holder (the plate was pathetically screwed in with drywall screws - good way to loose your front plate).
I found this old thread where a guy was getting the front plate holder for an accord, and I found a similar diagram for the 2005 civic hybrid A-CVT.
I'm guessing I need part 7, two 28-s and two 33-s. Can anyone confirm this?
#2
10-06-2011, 07:16 AM
Algomorph,
You'll need 4 of the 6x16 bolts (OEM p/n 93405-06016-04), the license plate base (71145-S5A-A40) and that should be it. Ref #28 is air spoiler clip nut and shouldn't be relevant to the license plate frame.
*diagram courtesy of hondapartsnow.com; all rights reserved
You'll need 4 of the 6x16 bolts (OEM p/n 93405-06016-04), the license plate base (71145-S5A-A40) and that should be it. Ref #28 is air spoiler clip nut and shouldn't be relevant to the license plate frame.
*diagram courtesy of hondapartsnow.com; all rights reserved
Thread
Thread Starter
Forum
Replies
Last Post
sday88
Mechanical Problems & Technical Chat
6
02-12-2007 03:17 AM
1995civic3
Mechanical Problems & Technical Chat
1
11-09-2004 01:23 AM
