New to the board
Thread Starter
Joined: Sep 2005
Posts: 4
New to the board
Whats up fellas I just signed up and wanted to introduce myself. My name is James and I am 24 years old from Mississippi. I drive a 94 EX Coupe, I purchased the car about 5 months ago. Right now its stock, but I have been steady in ordering parts. In one week I am pulling it into my dads body shop to start the buildup which should take about 2 1/2 or 3 weeks to install everything and body work/paint which will all be done by me(except paint which will be done by my father). Heres a run down of what I have and what I am awaiting delivery of:
What I have:
-Skunk2 tuner lugs
-Skunk2 Mega Power catback exhuast
-Omni Power rear LCA's
-Powder coated valve cover "wrinkle red"
-Wings West RS side skirts
-Brembo cross drilled/slotted rotors
-Skunk2 coilovers
-Skunk2 rear camber kit
-Type-R rear lip
-Mugen V2 front lip
-New OEM front bumper
-Skunk2 short throw shifter
-Skunk2 shifter ****
-Spoon side mirrors
-Vision amber corner lights
-Tokico HP series struts/shocks
-ES shifter bushings
-Injen RD series cold air intake
-Skunk2 adjustable front camber kit (front UCA's)
-17" Bronze Rota Subzero's
I am still awaiting delivery of:
-Skunk2 extended wheel studs
-ViS OEM carbon fiber hood
-DC Sports 4-2-1, 2 piece brushed stainless header
-(5)Yokohoma AVS ES100, 205/40/17
Next week I will be ordering:
-Brembo drums
-AEM/Nissan brake pads
-Carsound catalytic converter
-New OEM brake calipers. Sending these off to get powder coated
And have tons of future plans. If you feel the need, more can be seen: http://www.cardomain.com/profile/civic2bbuilt
And so this wont be a complete waste of thread, heres a few pics
Comments/questions good or bad will be appreciated!
What I have:
-Skunk2 tuner lugs
-Skunk2 Mega Power catback exhuast
-Omni Power rear LCA's
-Powder coated valve cover "wrinkle red"
-Wings West RS side skirts
-Brembo cross drilled/slotted rotors
-Skunk2 coilovers
-Skunk2 rear camber kit
-Type-R rear lip
-Mugen V2 front lip
-New OEM front bumper
-Skunk2 short throw shifter
-Skunk2 shifter ****
-Spoon side mirrors
-Vision amber corner lights
-Tokico HP series struts/shocks
-ES shifter bushings
-Injen RD series cold air intake
-Skunk2 adjustable front camber kit (front UCA's)
-17" Bronze Rota Subzero's
I am still awaiting delivery of:
-Skunk2 extended wheel studs
-ViS OEM carbon fiber hood
-DC Sports 4-2-1, 2 piece brushed stainless header
-(5)Yokohoma AVS ES100, 205/40/17
Next week I will be ordering:
-Brembo drums
-AEM/Nissan brake pads
-Carsound catalytic converter
-New OEM brake calipers. Sending these off to get powder coated
And have tons of future plans. If you feel the need, more can be seen: http://www.cardomain.com/profile/civic2bbuilt
And so this wont be a complete waste of thread, heres a few pics
Comments/questions good or bad will be appreciated!
Thread Starter
Joined: Sep 2005
Posts: 4
RE: New to the board
Thanks for the welcomes guys!
I hope within the next 6 months I am financially able to swap out the D16z for a B18c and LSD tranny from hmotorsonline.com. I will more than likely keep it N/A. Until then just I/H/E for my little D
ORIGINAL: Forty04
Welcome aboard James. Looks like you've got a lot of goodies already. What else are you thinking about as far as power adders?
Welcome aboard James. Looks like you've got a lot of goodies already. What else are you thinking about as far as power adders?
Laced with Sarcasm
Joined: Mar 2005
Posts: 15,280
RE: New to the board
ORIGINAL: Skunk2EJ1
Thanks for the welcomes guys!
I hope within the next 6 months I am financially able to swap out the D16z for a B18c and LSD tranny from hmotorsonline.com. I will more than likely keep it N/A. Until then just I/H/E for my little D
Thanks for the welcomes guys!
ORIGINAL: Forty04
Welcome aboard James. Looks like you've got a lot of goodies already. What else are you thinking about as far as power adders?
Welcome aboard James. Looks like you've got a lot of goodies already. What else are you thinking about as far as power adders?