RE: Pics of my EF9 B18C
 

nice ef man, what is that stuff in the hatch?

RE: Pics of my EF9 B18C
 

the first pic? i was wondering that too.

RE: Pics of my EF9 B18C
 

Way to rock the 4G. That's how it should be done.

That's pretty much always a problem with B-series swaps into EF's. The only other option is to take the cam gear section of the timing cover off, which is a little risky.

RE: Pics of my EF9 B18C
 

Carbon fiber hoods aren't worth it. They are pretty expensive and you save like 12 lbs. Take the crap out of your trunk, race on half a tank, and take the rear seats out (if applicable) and you've saved the same, if not more wieght for free. Then you can save you CF hood money for something that will give you some really good gains.

RE: Pics of my EF9 B18C
 

hey all. for those who are wondering what the stuff in the hatch are, the big silver tank is a surge tank(swirl pot) which eliminates the risk of the motor being starved of fuel while taking fast corners, the thing with the green label is a pre pump which pumps fuel out of the tankand into the surge tank, it originally didnt need it as the original motor was carby and runs a low pressure fuel system and the other thing attached to the blue piping is the main high pressure pump(350 hp capability) all of these items are essential to the swap, all up this system cost me close to $1000. the whole swap around the $10000 mark. pretty easy but puts a hefty hole in your pocket. but every cent was worth it. it goes F****NG HARD. i recommend it to all honda civic lovers.

RE: Pics of my EF9 B18C
 

thats cool stuff man, over here most 88-91 civics if not all were fuel injected so swaps cost a lot less for us, but i love the car man.

RE: Pics of my EF9 B18C
 

Nice EF, you practically never see those anymore. Hope everything works the way you want.

RE: Pics of my EF9 B18C
 

everything is working sweet. the most annoying thing is the solid engine mounts that i fitted. the mounts are made from billet aluminium and the bushings are made of nolathane instead of rubber, this combination makes for great mouns that allow for minimum movement and are basically unbreakable. the downside is that all of the engines vibrations are sent straight into the cabin which is really bad when your engine is revving at 9000rpm... i guess it all adds to the whole racer setup that i have. i always did say that i want the car for performance and not comfort.

RE: Pics of my EF9 B18C
 

That's a damn nice setup you got there, Welcome aboard!!