Platinum00 Introduction >>
#1
Platinum00 Introduction >>
Hello there. New user here to the forum, by no means new to the civic sceen. Below is a current parts list on my 20000 D16Y8. If anyone is in the columbus area, let me know.
Benson Sleeved block, stock bore
CP 9.1 pistons
Eagle rods w/ arp2000 bolts
Mircopollished crank
OEM headgasket
ARP Headstuds
D16Y8 head
Port & Pollished
3 angle valve job
Zex 105300 cam
Suptertech springs and TI retainers
Edelbrock performer x
PCV system removed
Jaz catch cans
Spearco radiator
Permacool FAN 14" w/ 2900 CFM
Setrab Oil cooler
Permacool 180* oil thermostate
Stock d16y8
OBX LSD
Action 2MS, 6 puck, 3100 lbs
8.5 lb aluminum flywheel
Fast Line Performance Shifter
AutoZone axles - Lifetime Warranty
Precision sc50 .48 a/r 50 trim
Custom RamHorn manifold
Tail 38mm wastegate w/ 10 psi spring
HKS SSQ bov
JRC 8" intercooler
Custom 2.5 charge piping
Custom 3 inch downpipe
Custom 3 inch turbo back exhaust , manaflow muffler
Custom Dump
P28 hondata s300 w/boost
Greddy profec b spec II
RC 750cc injectors
Aeromotive FPR
Walbro 255 fuel pump
AEM Fuel rail
MSD Cap , and external coil
Autometer water, oil, boost, a/f, egt gauges
Ground Control custom rates 350f/450r
Koni Yellows Full adjustable.
Omni-Power front and rear camber kits
Suspension Techniques front and rear sway
Neuspeed front upper and rear lower tiebars
6 Point Cage w/ Sparco 4 Point Harnesses
Energy Suspension Inserts
Full-Race Traction bar
NRG Engine Damper
Manual stearing rack conversion
TSW Catalunya 16's on Falken Azenis RT-615
Lenso grey 13' wheels on M&H Slicks
4 wheel GSR disks
Brembo slotted
Axxis Ulimate pads
Benson Sleeved block, stock bore
CP 9.1 pistons
Eagle rods w/ arp2000 bolts
Mircopollished crank
OEM headgasket
ARP Headstuds
D16Y8 head
Port & Pollished
3 angle valve job
Zex 105300 cam
Suptertech springs and TI retainers
Edelbrock performer x
PCV system removed
Jaz catch cans
Spearco radiator
Permacool FAN 14" w/ 2900 CFM
Setrab Oil cooler
Permacool 180* oil thermostate
Stock d16y8
OBX LSD
Action 2MS, 6 puck, 3100 lbs
8.5 lb aluminum flywheel
Fast Line Performance Shifter
AutoZone axles - Lifetime Warranty
Precision sc50 .48 a/r 50 trim
Custom RamHorn manifold
Tail 38mm wastegate w/ 10 psi spring
HKS SSQ bov
JRC 8" intercooler
Custom 2.5 charge piping
Custom 3 inch downpipe
Custom 3 inch turbo back exhaust , manaflow muffler
Custom Dump
P28 hondata s300 w/boost
Greddy profec b spec II
RC 750cc injectors
Aeromotive FPR
Walbro 255 fuel pump
AEM Fuel rail
MSD Cap , and external coil
Autometer water, oil, boost, a/f, egt gauges
Ground Control custom rates 350f/450r
Koni Yellows Full adjustable.
Omni-Power front and rear camber kits
Suspension Techniques front and rear sway
Neuspeed front upper and rear lower tiebars
6 Point Cage w/ Sparco 4 Point Harnesses
Energy Suspension Inserts
Full-Race Traction bar
NRG Engine Damper
Manual stearing rack conversion
TSW Catalunya 16's on Falken Azenis RT-615
Lenso grey 13' wheels on M&H Slicks
4 wheel GSR disks
Brembo slotted
Axxis Ulimate pads
Last edited by platinum00; 05-08-2009 at 02:53 PM.
#4
Holy ****... Wow, I really can't wait to see some pics! Get some up, or you're lying. Must be an insane ride, whats your quarter mile time and hp?
Last edited by jwmm04; 05-08-2009 at 02:55 PM.
#5
pics should be in the 1st post. if there not working, try the link below.
http://sites.google.com/a/austinpritchard.net/pics/
http://sites.google.com/a/austinpritchard.net/pics/
#8
Are the pics still not working? They are showing up on my end.
Sorry guys.
I am selling the car because I have had it 10 yrs, and im just looking to start a new project. Besides some cosmetics, there is really nothing more I can do to this thing.
Sorry guys.
I am selling the car because I have had it 10 yrs, and im just looking to start a new project. Besides some cosmetics, there is really nothing more I can do to this thing.
Thread
Thread Starter
Forum
Replies
Last Post