Hey guys, kinda looking for some suggestions on where im at and what u may think for for where i wanna be. here goes.

98civicex
d16y8 head
stage2 turbo crower cam
titanium springs
75mm vitaras
eagle rods
skunk2 intake
b&m fpr
greddy turbo kit, 19t
greddy intercooler
310cc injectors
emanage
stock size exhaust.
heres my question, will i be able to make 300 horse with this. im sure i need to change injectors, but im not sure if i should go 440cc or 550cc or bigger. also anyone know how much this kit will put out. im not sure which way to go next.

 

440 should be enough also upgrade your fuel pump, and exhaust, and is your ecu tuned?

 

i went to a custom exhaust place i wanted to go 3" nut they said the max would only be 2.5" would that be ok? ecu is only basemapped. been ok on it, but before i got a real good tune i wanted to be close to my goal, so i wasnt wasting 500 bux a wack.

 

2.5 is perfectly fine 3" is to big. also get a wide band o2 sensor so you will be able to know what your air/fuel ratio is.

 

yep have intentions on that as well, since i have the intake would a larger throttle body be a good idea and fuel rail?

 

you can upgrade the fuel rail if ya want to, but fot the tb for a sohc i say it should be fine. going bigger isnt always better.

 

ok cool thanks. have to wait for more funds to come in and buy somemore

 

you might get a 60mm throttle body from a B-series or something, but I wouldn't go bigger than 62mm

 

so the edlebrock or skunk2 68mm would be overkill?

 

for a sohc yes its overkill,