turbo b16 yet again, lol
#1
turbo b16 yet again, lol
ok i just scored a turbo kit for 500 bux, turbonetics t3/t4, the blow off valve is turbo xs and the wastegate is greddy, intercooler, etc. just need injectors/fuel pump. is this setup too much for a stock b16a2? (i wanna run about 10-15 psi) if it is too much what else do i need? i have a 10k budget but i have to do body and interior too.(daily driven) thanx guys
#2
RE: turbo b16 yet again, lol
you can do 10 psi on stock internals but u need a REALLY good tune to keepur engine safe andreliable.alsour gonna need to get ur computer chipped. i wish i had 10K to spend on parts etc
#5
RE: turbo b16 yet again, lol
to not blow your engine up, i would only run 8 psi for now until you get your engine built. you will need a chipped ecu and not a fmu. also make sure you have a dump tube for the wastegate made and the downpipe made.
#7
RE: turbo b16 yet again, lol
ORIGINAL: skateman190
yeah, i decided 8 psi on a t3/t4 turbonetics turbo, but a good friend that builds turbo cars a bit reccomends a 10:1 fmu for my setup, whats your experience with this?
yeah, i decided 8 psi on a t3/t4 turbonetics turbo, but a good friend that builds turbo cars a bit reccomends a 10:1 fmu for my setup, whats your experience with this?
Get a chipped ecu and run Neptune or Crome, have a basemap put on the chip, then take your car to someone who knows how to tune whichever program you intend to run.
#9
RE: turbo b16 yet again, lol
my experience with fmu's is seeing my friends at 8 psi blowing parts right and left up off their cars. do it the right way. you can get a chipped ecu for 120, then go to a place that tunes like forty04 said. also look at dsm 450 injectors if you want something cheap.