Hey guys,

Im thinking about droping my rear end of the car a couple inches and was wondering what all I need. Do I get springs or coilovers. The front end of the car was already dropped when I bought it, they cut the springs. Also, do I need struts or what?
Thanks!
Andrey

 

do it all. just get a setup like the Tein basic or SS. or the Tokico Illumina Rs. that will solve all of your problems. and look into a camber kit too.

 

all you really NEED is a set of springs or coilovers, but if you want to do it right then listen so sacicons suggestion above

 

Thanks for the info. Camber kit wise, I found a couple on ebay, would these work, and is it all that I need?

http://cgi.ebay.com/ebaymotors/ws/eB...category=33581


http://cgi.ebay.com/ebaymotors/ws/eB...category=33581

 

those would work, but thats not the best design, id go with the Skunk2 style ones, such as Omnipower or Blox. it replaces the whole upper control arm, its a better design, and its easier to adjust. try these.Skunk2

 

i lowered my civic and i used coilovers f/b and a revo camber kit, sucks i couldnt get it up onto a lift to get it aligned i had to go to one of straight those drive on ones, no biggy but........


coil overs
camber kit

 

Thanks guys. Sacicons, how about the rear? Can you give me a link, or a link to a complete set.
Thanks again!
Andrey

 

the ones i got for the rear, i think it was Neuspeed, were like 60 bucks on Ebay, ill try to look tomorrow though. but they work great.