Engine & Internal Chat about beefing up your engine's insides here.

d15b or z6

Thread Tools
 
Search this Thread
 
Old Feb 18, 2006 | 01:50 AM
  #1  
trex87's Avatar
Thread Starter
Joined: Feb 2006
Posts: 10
From:
Default d15b or z6

i have a choice between a d15b and a d16z6 to put in my 87 crx. which one should i put in and why? plus give me any info on both the engines if u have any
 
Old Feb 22, 2006 | 03:29 PM
  #2  
jusplayn85's Avatar
HCF Member
Joined: Dec 2005
Posts: 269
From:
Default RE: d15b or z6

D15b.. I just put a z6 head on my b8.. I've done a lot of research and it seems like this set up has a lot of potential, so I didnt go with an all out swap.
 
Old Feb 22, 2006 | 03:38 PM
  #3  
ef4life's Avatar
Senior Member
Joined: Nov 2005
Posts: 2,667
From:
Default RE: d15b or z6

if you want to go put internals in for the d15b, use aftermarket rods for a z6, but you would need to have custom pistons made.

the z6 is usually cheaper and easier to find parts for
 
Old Feb 23, 2006 | 02:09 AM
  #4  
Marty's Avatar
HCF Member
Joined: Jan 2005
Posts: 8,519
From: South Central
Default RE: d15b or z6

D15B all the way
 
Old Feb 23, 2006 | 02:48 PM
  #5  
Whitelightning93's Avatar
Joined: Feb 2006
Posts: 42
Default RE: d15b or z6

D16
 
Old Feb 23, 2006 | 09:15 PM
  #6  
trex87's Avatar
Thread Starter
Joined: Feb 2006
Posts: 10
From:
Default RE: d15b or z6

yeah i was leaning more toward the d15b, but that motor is like $500 but i can get the d16 for like 2 or 300 from my friend. i like the thought of the full jdm motor though, so i dont know. but keep the feedback coming. if u have any kind of info on the motors, feel free to let loose.
 
Old Feb 23, 2006 | 09:18 PM
  #7  
ef4life's Avatar
Senior Member
Joined: Nov 2005
Posts: 2,667
From:
Default RE: d15b or z6

the d15b tranny's were availible with a lsd option, and have a little more compression than a z6
 
Old Feb 23, 2006 | 09:38 PM
  #8  
Kedawei's Avatar
Senior Member
Joined: Sep 2005
Posts: 1,930
From:
Default RE: d15b or z6

Besides the LSD trans would there be any advantage to the D15 over the D16? (Boosted.)
 
Old Feb 23, 2006 | 09:48 PM
  #9  
ef4life's Avatar
Senior Member
Joined: Nov 2005
Posts: 2,667
From:
Default RE: d15b or z6

not really any advantage. the d15B has a better rod to stroke ratio, which will allow it to rev a bit higher easier (lower piston speeds=less broken parts). custom pistons are hard to find for a d15b, because it usess the longer d16 rods so the piston is special design

so if you are going to build it internally then it would be easier to go with a z6 because you can get cheaper off the shelf internal parts for it
 
Old Feb 23, 2006 | 10:10 PM
  #10  
Pete's Avatar
HCF Member
Joined: Feb 2005
Posts: 7,168
From: Jersey
Default RE: d15b or z6

<---------------------------loves his boosted D16Z6
 



All times are GMT -8. The time now is 05:18 AM.