do I have to take the glovebox off to get at the cables 2 check my CEL codes?
Thread Starter
|
HCF Member
Joined: Sep 2007
Posts: 95
From: Aurora, IL
do I have to take the glovebox off to get at the cables 2 check my CEL codes?
I posted a topic about using a paper clip as a jumper wire to make the CEL blink to get the codes and I read the DIY on it, but I don't know whereabouts the cables are that I'm supposed to detach and then jump wire the one. Are they under the glovebox or behind it, in which I would have to remove it? Thanks.
Laced with Sarcasm
Joined: Mar 2005
Posts: 15,280
RE: do I have to take the glovebox off to get at the cables 2 check my CEL codes?
You need to remove the kickpanel covering the ECU. You'll have to dig back a litlle, but taking the glove box out is not necessary
June 2010 ROTM
Joined: Oct 2006
Posts: 3,284
From: Milwaukee, WI
RE: do I have to take the glovebox off to get at the cables 2 check my CEL codes?
On my 93 coupe the ECU is on the passenger's side below (not behind) the glove box on the right. You have to pull back the carpet to find the jumper. It's held in a green plug holder.
Thread
Thread Starter
Forum
Replies
Last Post
Try.Fail.Repeat
Mechanical Problems & Technical Chat
9
Oct 7, 2008 06:32 PM
jeremyp183
Private 'Wanted' Classifieds
3
Jul 20, 2007 11:46 PM
