I have a '94 Coupe with a B18B1. The car currently has no A/C and needs a CV Boot replacement on the passenger side axle only.

What axles are in my car so I know which kit to buy, Integra or Civic?

And, for the A/C compressor, do I need a bracket kit or will any Integra compressor bolt right in?

Half of the A/C system is intact and half has been removed. I'm shopping for the missing parts (some of the lines, a compressor, condenser, and fan.) I'm hoping everything will all bolt in and work since it's starting to get a bit warm here in AZ!

Thanks for the help guys!

-D

 

For the axles your going to need either of these- 90-93 integra axles,94 up integra axles,94-97 delsol vtec axles, or 99-00 civic si axles.I dont recommend the 90-93 integra axles though bc you may have to change the shaft seal depending on your tranny.Better off with the 94 up. As for air conditioning Im not positive but I beleive you keep your stock ac stuff in there, and us a 94-95 del sol ac bracket.

 

Hmm, well most of my A/C system is missing from the car. I would assume an Integra compressor would bolt right up to the rest of the system for a Civic but I want to make sure before I start ordering parts. The only parts I have are the evaporator and the lines from there to the condenser...

 

Do you already have the integra compressor? I think that would be the only reason you would try to fit one there.If your car already has most of the parts for the ac, then y not order the parts for your car? I would think the civic one is probably cheaper than the integra.

 

No, I do not have a compressor. Used/working Civic and Integra ones are the same price on eBay. I may be selling the car soon so I don't want to spend $200 on a remanufactured one.

 

If they are relatively the same price, just buy the right one for the car.It doesnt need to be changed bc of the swap.

 

So are you saying a Civic compressor will bolt up to a B18B with no modifications?

*confused*