So I have done a little research on this and have a bit of an idea.... I have pulled out the ignition switch from under my dash.... I have a 50 amp toggle and a 60 amp push button.... How cani wire this push button and toggle from that ignition switch to start my car? I understand it's easier to steal and everything but it is a race car... So I do not want to use the key anymore.

 

On the rotary ignition switch, the two white wires are feeds from the battery (via main fuses in the underhood fuse box). The black wire with white stripe is the starter, connect it to the button. Everything else is ignition or accessories and should be wired to the toggle switch.