Cold intake brands etc
#13
That's exactly what i thought, because it install to the engine.. not tranny.
But on every intake i bring up except the 80+26 one, it says (manual only) so just wondering if anyone can verify if this can be used for auto also?
But on every intake i bring up except the 80+26 one, it says (manual only) so just wondering if anyone can verify if this can be used for auto also?
#14
It could be possible that the AT gets in the way. That's why it seems there is more tubing for the AT then the MT.
Do a quick search for it you might find your answer. 80 bucks is still cheaper then the K&N or AEM one so I wouldn't complain to much. No one said modding was cheap especially at the pursuit for more power.
Do a quick search for it you might find your answer. 80 bucks is still cheaper then the K&N or AEM one so I wouldn't complain to much. No one said modding was cheap especially at the pursuit for more power.
Last edited by xsteinbachx; 01-29-2009 at 07:45 AM.
#16
i dont think there is a difference between the auto and manual trans intake. for a cold air intake that's about the right price for an ebay kit. a decent name brand one would run you at least 150-200. get the ebay kit and a quality name brand filter if you want to save money
#18
You dont need to get a k&n or aem filter for cheapbay intakes. I have used the cheapbay filters my 89 accord, 04 sentra ser and my 98 civic hx. I have never had any problems, I do oil them with k&n filter oil to trap more dirt though. And yeah you will see the same gains with the ebay intakes as you would with a name brand so save your money. Just look at a few before you order from ebay.
#20
I'd like to see dyno proof* of an ebay intake with a good name-brand filter decreasing power. When I see hard proof, I'll believe it.
*dyno proof means several runs both with the intake and with the stock intake, switching back and forth (something like 2 runs with the stock, 1 run with the intake, 1 run with the stock, 2 runs with the intake, etc), allowing the car to cool between each run.
*dyno proof means several runs both with the intake and with the stock intake, switching back and forth (something like 2 runs with the stock, 1 run with the intake, 1 run with the stock, 2 runs with the intake, etc), allowing the car to cool between each run.