What is all involved with a door swap? I have a 93 EG hatch and I found some doors with power windows and locks and was just curious on what it would take to get them wired up and working properly. Thanks in advance.

 

i belive all u would need to do is wire it to the fuse box

 

you believe wrong


OP: your car's floor harness doesn't have the wires in it. You will either have to swap in the correct floor harness, or look up the wiring diagram and run all your own wires.

 

ok jerk off

 

Trustdestruction is right, sorry Texasmade.

 

owned J/K

you could wire it up yourself BUT.... you need the harness plugs from the cabin... otherwise you have to cut the plug off and wire everything from the door to the inside cabin which wont look good at all. youd want to keep the stock wire loom and harness off the POWER vehicle..... its not going to be very easy.... the power locks are very easy but the windows might be alittle harder... but doable.... its not really difficult if you have the rest of the other car or a friend with the same car that has power options.

 

That sounds like it might be a little more than I want to tackle. I wasn't sure on what it all would take so I figured I would ask the knowledgeable people here. Thanks for all of your input guys.