Inside and Out Talk about your interior and exterior mods here.

ebay fog light install

Old Aug 17, 2009 | 06:39 PM
  #1  
thebadgator87's Avatar
Thread Starter
|
HCF Member
Joined: Aug 2006
Posts: 153
Default ebay fog light install

the fog lights i got from ebay dont seem to be the same wiring that the oem instructions show has anybody came across this problem and know how to wire it?

thank you

btw its for a 99 ex
 
Old Aug 17, 2009 | 06:49 PM
  #2  
hamorhead's Avatar
HCF Member
Joined: Jun 2008
Posts: 1,190
From: Florida
Default

red goes to 12v
Black is ground
Yellow is accesory power

At least that's how mine was
 
Old Aug 17, 2009 | 08:19 PM
  #3  
thebadgator87's Avatar
Thread Starter
|
HCF Member
Joined: Aug 2006
Posts: 153
Default

i have no idea there is fuses and relays and its just not matching up to what the instructions say
 
Old Aug 17, 2009 | 08:48 PM
  #4  
SPP1919's Avatar
Junior Member
Joined: Aug 2009
Posts: 8
From: Boston, MA
Default

Are all the ebay ones like this??
 
Old Aug 17, 2009 | 11:48 PM
  #5  
WellFedHobo's Avatar
Moderator
Joined: Jul 2007
Posts: 4,961
From: Arkansucks
Old Aug 18, 2009 | 12:04 PM
  #6  
hamorhead's Avatar
HCF Member
Joined: Jun 2008
Posts: 1,190
From: Florida
Default

i din't check out the link itinerant posted but mine looked scary with all the parts but lay it out and use common sense and put it together slowly its not that bad it just looks scary

once you figure out what plugs go together put the wires to their power source (using the colors i previously posted)
 
Old Aug 18, 2009 | 12:26 PM
  #7  
WellFedHobo's Avatar
Moderator
Joined: Jul 2007
Posts: 4,961
From: Arkansucks
Default

Originally Posted by hamorhead
i din't check out the link itinerant posted but mine looked scary with all the parts but lay it out and use common sense and put it together slowly its not that bad it just looks scary

once you figure out what plugs go together put the wires to their power source (using the colors i previously posted)
Might I recommend actually checking the link I sent? It makes some pretty good recommendations on the power options...
 
Old Aug 18, 2009 | 12:32 PM
  #8  
hamorhead's Avatar
HCF Member
Joined: Jun 2008
Posts: 1,190
From: Florida
Default

lol i was just lazy earlier
but yea if you have the harness like iterant posted thats easier than what i had and said to do

i guess i should start reading before i post lol
 
Old Aug 18, 2009 | 12:52 PM
  #9  
croninc's Avatar
HCF Member
Joined: Feb 2008
Posts: 2,059
From: San Leandro, CA
Default

go to kregan or autozone and switch out the lights in them, they suck and will burn out hella fast o u might as well just replace them while they havent been installed
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
disaznjason
Mechanical Problems & Technical Chat
2
Apr 6, 2011 06:19 PM
WellFedHobo
Exterior DIYs
0
Aug 10, 2008 08:20 AM
WellFedHobo
Mechanical Problems & Technical Chat
14
Jul 27, 2008 10:49 AM
bigfank3
Inside and Out
3
Jun 30, 2007 06:59 AM
emooheo
Inside and Out
1
Sep 4, 2006 01:03 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 01:13 AM.