So I have a 94 civic dx coupe and thinking about doing a 94 integra front conversion. Other then the hood, bumper, fenders and headlights is there anything I should also need to make this conversion fit right? Also if anyone has done a mod like this can you tell me how successful it was? Thanks

 

... be skilled with a welder and bondo... also have plenty of spot weld drill bits and lots of patience... you will need a radiator support with the hood latch... also, i think you might have cut the fenders above the wheel well, and weld them together then bondo. also look for hood hinges as you might need to swap them out... its an ongoing project, it ran me about $1500 all together to put a del sol front end on my EG.

and air tools are a must! and a plasma cutter helps too.

 

thanks for the heads up vtecaddict. I thought I might need a radiator support. But didn't know if I was going to need to weld. Got to look into that. How long did the project take you? If you have any pic's of that del sol front on the EG please let me know. Sounds like it would look hot.

 

https://www.hondacivicforum.com/foru...ad.php?t=73864
thats his whole project thread

 

I was just gettn ready to post that. Thanks man. It took me about 2+ months to do with finding all the parts and getting time to put it all together.

 

wow what a great thread. I give u props for that project. looked longer then 2+ months. Liked the del civic pic too. Thank you both for the help.