installing new headlights.. help?
i'm sure it's the same for the '00....but i recently changed my headlights and i had to take off the front bumper to get to the bolts by the fender....it's not too much work...should be pretty straight forward...i'll be on if you need more info
yes you do, very easy like spark said...all the plastic clips by the grill pop off, 2 bolts under the bumper near the front and 2 screws, and 2 screws in your wheel well at the edge of were the bumper meets the fender and its off...you will have no trouble finding the bolts for the headlights after you get it off..and if you can, with your stock lights on, turn your beams on infront of a wall and mark where the top of your beams are, then after your put your other headlghts in move to the same spot and line them up with your line that you have there already and bolt them down..if you dont do this it dosent really matter,i didnt do it to mine and there good
Thread
Thread Starter
Forum
Replies
Last Post
Cosworth
Mechanical Problems & Technical Chat
3
Dec 15, 2008 05:35 AM




