I bought a set and I dunno how to wire themirrorportion in (I got the LEDs wired). I'm converting my 96 CX manual mirrors to power mirrors and I have the stock power mirror control switch, but I was hoping you could help me out with the wiring!

The M3's have wires: black, white, blue, brownish-gold...

And the stock control switch has (by position): 2-black/yellow, 3-yellow/red, 4-black, 5-blue/white, 6-blue/black, 8-yellow/black, 9-green/white

Two of the wireson the switch (black & black/yellow) are smaller in gauge than the rest so I'm assuming they are for power/ground, but to be honest, I really don't know. If anyone can tell me which wires are for up/down and left/right or at least point me in the right direction, it would be great! Thanks!