need help
I would think its the same as anyother cluster.
Take the cluster out.
Take the clear plastic cover off
And depending on the style you bought, go over your cluster needles, or you might have to pull the needles off.
If you have to take the needles off, becareful, sometimes they are glued, and you could brake them.
Also, make sure the car is off when you remove the cluster, and make sure you take note where your gas needle is at.
Beacuse once you take the needles off and then place them back and its wrong, then your f***ed, like say you have half a tank of gas.
Then you put the needles back on but you place the gas with a full tank, now your driving around with 1/2 of tank and your thinking its full.
Take the cluster out.
Take the clear plastic cover off
And depending on the style you bought, go over your cluster needles, or you might have to pull the needles off.
If you have to take the needles off, becareful, sometimes they are glued, and you could brake them.
Also, make sure the car is off when you remove the cluster, and make sure you take note where your gas needle is at.
Beacuse once you take the needles off and then place them back and its wrong, then your f***ed, like say you have half a tank of gas.
Then you put the needles back on but you place the gas with a full tank, now your driving around with 1/2 of tank and your thinking its full.
Last edited by SPLAT; Mar 19, 2010 at 03:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
TunerShark
Inside and Out
3
Sep 23, 2006 05:27 PM
rx9790
ECU Tuning & Fuel Management
0
Nov 1, 2005 05:53 PM
CivicCrazy
Suspension, Brakes, Tires & Wheels
2
Nov 29, 2004 11:50 AM



