Anybody have any tips on removing those two bolts on the bottom of the manifold? The ones that mount it to that bracket. This thing is proving to be a real pain in my ****! ITs a B16a3 by the way. Thanks!

 

remove from the bottom .. raise up the car

 

Yeah get under the car and reach up with a LONG socket extension to remove them. Or you can unbolt the bracket from the engine block and take the bracket out along with the manifold, but you have to deal with the wiring harness and some other stuff then.

 

THIS DIY BY MOBSTA was just posted up, maybe it'll help since you guys are both 6 gens

 

I used mk378 method and took the bracket off. Thanks for the advice everyone! I can't wait to pull the car out this summer. I hope the Skunk 2 mani is worth it! At least give me better throttle responce. Thanks again!