Did a search and all I could find was about fast blinking. ---

I have NO blinkers.

NOTE: Blinkers worked find before engine replacement

Can anyone give me an idea where to start? (Fuses obviously, but all check out OKAY)

 

Do your hazard lights also fail to work?

If fuses 10 and 34 are fine, then perform the tests detailed in the picture. The results should pinpoint the problem.

 

Thanks again, Ron. I'm going to have a crack at it in the morning when there's some daylight. My hazards do not work.

 

Possibly could be a dead relay or you forgot to plug something back in.

 

Pretty common for someone to pull the dash apart and forget to plug the hazard switch back in. The standard turn blinkers won't work in that case either; it's all the same circuit.