Mechanical Problems & Technical Chat If you've got a problem you just can't figure out, a noise you can't diagnose, or a check engine light that won't go away, ask about it here!

Occasional Starter Grinding...

Old Jul 13, 2007 | 04:45 AM
  #1  
Honger's Avatar
Thread Starter
Joined: Oct 2006
Posts: 2
Default Occasional Starter Grinding...

Need to get some clarification...

My wife's '99 Civic EX Coupe has an occasional problem with starting. From time to time, when she goes to start her car, the starter grinds (just like if you were to try to start it while it was already running). It is starting to happen more frequently, so I'm guessing her starter is going south. Is this a rebuildable part or do I just need to buy a new one? Any help you can offer would be great. Thanks!

Regards,
Joel
 
Old Jul 13, 2007 | 12:27 PM
  #2  
spitnhard79's Avatar
HCF Member
Joined: Apr 2007
Posts: 81
Default RE: Occasional Starter Grinding...

Starter is not properly working replace it ASAP otherwise you will get her stranded ...

Its one thing for you to be stuck on the side of the road but your wife .. HELL NO

To many wackos out there now days ...

100% it is the starter though , not the solinoid ...

You might be able to get the starter rebuilt dirt cheap on ebay ...

GOOD LUCK
 
Old Jul 16, 2007 | 10:22 AM
  #3  
Honger's Avatar
Thread Starter
Joined: Oct 2006
Posts: 2
Default RE: Occasional Starter Grinding...

Thanks for the reply, I will get right on it.

Joel
 
Old Jul 16, 2007 | 11:00 AM
  #4  
bp4131017's Avatar
HCF Member
Joined: Jun 2006
Posts: 193
From:
Default RE: Occasional Starter Grinding...

my starter makes that noise a lot when the battery isn't charged enough to get it going
 
Old Jul 16, 2007 | 11:55 AM
  #5  
addiction2bass's Avatar
Recognized HCF Member
Joined: Jun 2006
Posts: 11,203
From: Brownsburg, IN 46112
Default RE: Occasional Starter Grinding...

thiers two posible problems.....
ONE the starter outta adjustment or gear worn......
2 flywheel gear teeth are also worn from a uneven starter adjustment
 
Old Jul 16, 2007 | 12:08 PM
  #6  
mk378's Avatar
Recognized HCF Member
Joined: Jun 2007
Posts: 10,023
Default RE: Occasional Starter Grinding...

Yes while you have the starter off, inspect the gear teeth. Turn the engine with a socket on the front pulley bolt and look for any broken or missing teeth. A new flywheel isn't real expensive but you have to take the transmission out to replace it.
 
Old Jul 16, 2007 | 12:40 PM
  #7  
addiction2bass's Avatar
Recognized HCF Member
Joined: Jun 2006
Posts: 11,203
From: Brownsburg, IN 46112
Default RE: Occasional Starter Grinding...

ya to replace the fly wheel is quite a job!
but you realy should inspect the WHOLE flywheel! cause if thiers a few BAD grounded up spots it can do it again which could tear up the new starters gear teeth.... and if you adjust the starter for one of these grounded spots then with it in a good spot the teeth again wont engage and it will tear up the starter teeth then....


either way both are very important!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jonsaidthat
Mechanical Problems & Technical Chat
8
Jul 1, 2010 05:48 PM
Infinitrium
Mechanical Problems & Technical Chat
5
Feb 12, 2010 01:53 AM
tpatru
Mechanical Problems & Technical Chat
13
Sep 18, 2009 11:58 AM
MaximusFunk
Mechanical Problems & Technical Chat
8
Jul 20, 2009 07:49 PM
trichard310
Transmission & Differential
0
Oct 20, 2007 02:51 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 04:31 AM.