i ment do you mind if i copy your setup?....and as for the ebay turbo's ino that.. i looked at some brand named used ones.. and all those actually ebay special junks...

 

Ah. Sure. Just understand that it's going to take me a month or more to do enough research to get the full list of components together.

 

no problem.. until then ill keep on looking for some good deals..

 

so i just read about the ssautochrome turbo from ebay and people who bought it and broke it in and ran a oil restrictor has no problems with them.. they been running it for over a year now... anyone on here tried these cheap kits???

 

i ran an ebay kit on my single cam fine. everything worked like it was suppose to. just make sure you get a cast iron mani so cracking will be less of a worry. my kit came with an oil restrictor on the feed line so i ran it, whether it helped or not i don't know. i really have never heard of "breaking in" a turbo kit so i don't know what you mean by that... i'd suggest looking at one of the more complete kits at around 600 shipped

just remember, never skimp on the tune, i used hondata s300 and brought it to a reputable shop for tuning.

 

thanks for telling me bro... im looking into a used turbonectics complete kit right now if this dont fall through ima do it the cheap way.. if you can, can you send me a link of the exact kit you bought... and how long have you ran it

 

he didnt run it long his car was jacked, and stripped....

if you cheap out then you get what you pay for,

 

yep, only ran it a bit over two months

the seller i got it from is closed i think. but i got something similar to this
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT

i just looked for a set with a cast iron mani. i had universal intercooler pipes too not like the ones in the link

 

so i picked up a turbokit this morning.. came with
turbonectics turbocharger t3/t4 .63
xspower intercooler with all pipining
oil feed line and sensor
downpipe
turbo manifold
blitz bov
psi gauge
oil temp gauge
oil pressure gauge
waste gate with 5.7 psi spring


so now wat else do i need to make it run..
im guessing

injectors
boost controll
oil return line
ecu
turbo timer
anything else???

 

^ Get the ecu chipped with a basemap. Most people on here recommend phearable.com You'll want to get the car tuned to get the most you can out of the turbo. You'll also need a way to get the oil to the turbo. Either run an oil filter sandwich plate or a tapped oil pan.