ok i have a b18 in a 94 civic coupe. i also have hondata s300 for ecu tuning. now my problem is i upload a base map from hondata and the engine will not start it cranks but will not start i pulled a plug and checked for sparks it sparks and i get fuel into the cylinder but it only cranks. and i pulled the plug again and its wet so i have no idea what to do to get it to run again.

 

well this site used to have people who gave advice and there opinion when i asked questions i could really use the help if anyone can help any idea or advice would be very much appreciated. please you can ask ?s that are useful to help figure out the problem.

 

What recent event precipitated the no-start problem?

I am no tuner. However, for stock engines that won't start but have both spark and fuel, the first thing I would suggest would be to check whether the timing belt slipped.

 

is it possible that the basemap has it way too rich and it's flooding?

 

In this case, maybe he should check for the smell of gasoline in motor oil on the dipstick?

It might also be informative to know if the CEL is ON.

Does the downloaded hondata base map match with your motor?