Looking to buy OEM rear sway bar from 94-97 Del Sol (Vtec) or 88-91 CRX Si.
Majorly looking for 15mm rear sway bar to fit my '98 Civic LX.
Location: Chicagoland, IL

Thanks for looking!

bg_13@abv.bg

 

Any gsr or 4 dr teg is a 14mm and really easy to find and run about $20, that's I've got on my ek. You wont notice the difference and a lot easier to find.

 

A guy mailed me that he has sway bar from Civic EF Si (13mm). He said that it's solid, and the 15mm from CRX is not solid, and the 13mm is stiffer. Is that true?

 

I'd suprised if a 15mm is hollow, usually only big sway bars are hollow. Don't pay more than $20 for a sway bar lol, just go to a junk yard or craigslist. I pulled mine off a 4 dr Teggy, gsr sway bars are easily found for $20 or less. 4 dr and gsr sway bars are the same, and I know mines solid. I'd be really suprised if Honda made hollow rears that small.

 

scott, did that sway just bolt right up? or do you have custom mounts?

 

Either have to in a subframe brace or d brackets off a 99-00 si. I went to Honda and bought the brackets, they were $30. And then I blox endlinks which were like $40.

 

Another guy from a local junkyard said that has a Del Sol (vtec) 15mm and asks for it $85. He said not sure deas it come with the hardware - links, brackets, and bolts.
So $85 is too much only for the bar, but if comes with all hardware might be a deal, and if I go 10-20 bucks lower...?
I checked the Honda dealer for the same brand new bar, it's $118 (just the bar).
I'll check the market for used bar from Integra.

Thanks a lot for your help!

 

I got a 15mm sway bar from Del Sol (vtec).
The guy shipped it from Cali. It cost me $60 with all the hardware and the shipping.
There is no a single rust spot on it.

Now I am looking for 2 subframe plates to rainforce the subframe a little where the bar will be attached to.