WTB:96-00 Manual Parts
#1
WTB:96-00 Manual Parts
I am looking to buy everything needed to convert my 2000 EX D16Y8from Auto to Manual. This would include: transmission, clutch, flywheel, pedal assembly, linkage, hydro lines, ecm, master cylinder, center consol, shifter and boot, trans mounts, hardware, and many other things I am sure I am forgeting at the moment. It would be ideal if I could get everthing from one person for simplicity sake so someone looking to part out would be great. Let me know.
#2
RE: WTB:96-00 Manual Parts
just some advice, but check out your local junkyard. you should be able to pull quite a few of those parts off a junked car. i would just get the transmission, flywheel, and clutch from somewhere else, unless the junkyard can guarantee that it works good.
#3
RE: WTB:96-00 Manual Parts
i have a manual trans for sale from my d16y7 it will bolt up to your y8 but i dont think i have the linkage any more. i cant seem to find the flywheel but ill look for it but the trans was rebuild less than 800 miles ago with a new main shaft. but i dont have the rest u pry are better off getting it at one place haha. you dont need a diff center concil i dont think u can use the same one the plastic peice around the shifter is connected to the part thats connected to the floor so ull need manual trans break and clutch pedals . 2
#4
RE: WTB:96-00 Manual Parts
your best bet is to look for a totaled civic.
thats what im trying to do... that way i have all the stuff that i need.
so just search localy.
post on craigslist.com
and last cross your fingers!
thats what im trying to do... that way i have all the stuff that i need.
so just search localy.
post on craigslist.com
and last cross your fingers!
#5
RE: WTB:96-00 Manual Parts
im searching for a totaled civic5speed localy and i think i found one. tho depending on the final price it goes for if i get it or not. i would REALLY LOVE TO DO A 5SPEED manual swap! i used to like my automatic and still would in traffic.LOL but i want more performance/MPG
#6
B-series
Hassports Mounts for ek $325
skunk2 intake manifold $175
ls vtec swap: $2,000
b16 head
-Ferrea valves (flat faced)
-Ferrea Dual valves springs
-Ferrea Titanium Retainers
-Ferrea Valve Seals
Ls block
-EnDyne 9:1 cr pistons
-Eagle rods
-Acl Bearings
-84mm Cast Iron sleeves
-Act 6puck clutch
-Act Prolight Flywheel
Ls-tranny
axlel..ecu..most of the stuff you need...
Hassports Mounts for ek $325
skunk2 intake manifold $175
ls vtec swap: $2,000
b16 head
-Ferrea valves (flat faced)
-Ferrea Dual valves springs
-Ferrea Titanium Retainers
-Ferrea Valve Seals
Ls block
-EnDyne 9:1 cr pistons
-Eagle rods
-Acl Bearings
-84mm Cast Iron sleeves
-Act 6puck clutch
-Act Prolight Flywheel
Ls-tranny
axlel..ecu..most of the stuff you need...
Thread
Thread Starter
Forum
Replies
Last Post
dave_57204
Private 'Wanted' Classifieds
2
10-03-2007 09:31 PM
BillyB98
Private 'Wanted' Classifieds
2
09-18-2007 08:52 PM
TRILOGY
Private 'Wanted' Classifieds
1
07-16-2006 04:52 PM