Do I need intermediate shafts?
Thread Starter
|
HCF Member
Joined: Mar 2007
Posts: 276
From: Arlington, VA
Do I need intermediate shafts?
Do I need intermediate shafts from a manual if I'm converting from auto to manual? Almost every part list I looked at didn't list them, but I recently stumbled upon one that did...
Thread Starter
|
HCF Member
Joined: Mar 2007
Posts: 276
From: Arlington, VA
RE: Do I need intermediate shafts?
I'm putting it an D16Y8 tramission...I'm converting from the dreaded CVT (98 HX).
Here's the article that said I would need intermediate shafts...The conversion in the article it for a 92 Civic EX.
http://www.torontocivics.com/article...to-manual.html
Here's the article that said I would need intermediate shafts...The conversion in the article it for a 92 Civic EX.
http://www.torontocivics.com/article...to-manual.html
HCF Member
Joined: Jul 2005
Posts: 7,994
From: Rochester, NY
RE: Do I need intermediate shafts?
The motor in the article is B-series. If you were using a B-series engine/tranny, you would need an intermediate shaft
Engine Swap and Auto-to-Manual Conversion: B18B1 motor, manual LS tranny, and stock manual ECU from a '95 Integra RS
Thread Starter
|
HCF Member
Joined: Mar 2007
Posts: 276
From: Arlington, VA
RE: Do I need intermediate shafts?
Thanks for your help. Guess I should have paid closer attention...
Sorry, quick thread jack...
I've got a D16Y5 w/ VTEC-E will there be any problem with my new Y8 tranny and P2P ECU?
Sorry, quick thread jack...
I've got a D16Y5 w/ VTEC-E will there be any problem with my new Y8 tranny and P2P ECU?
Thread
Thread Starter
Forum
Replies
Last Post
