Turbo Timer
#1
Turbo Timer
Hi guys I'm new to the site and pretty new to Hondas.
I just picked up a 95 Coupe and was wondering if any of you can help me with my Greddy turbo timer.
So far I got it where it will power on but will not keep the car running or even count down.
Any help would be much appreciated
I just picked up a 95 Coupe and was wondering if any of you can help me with my Greddy turbo timer.
So far I got it where it will power on but will not keep the car running or even count down.
Any help would be much appreciated
#2
There should be three heavy gauge wires
1: Constant 12 volt supply
2: Ignition source
3: Accessory Sorce
For your vehicle you will connect to the follow factory color wires (off the ignition switch, same order as above)
1. White
2. Black/Yellow
3. Yellow
If you want more descriptive instructions you will have to post the exact type of turbo timer you have.
1: Constant 12 volt supply
2: Ignition source
3: Accessory Sorce
For your vehicle you will connect to the follow factory color wires (off the ignition switch, same order as above)
1. White
2. Black/Yellow
3. Yellow
If you want more descriptive instructions you will have to post the exact type of turbo timer you have.
#3
#4
#5
recheck your wiring... I had the same problem with mine when I first installed it. The timer would turn on when the car was on but it will not stay on for the count down. Turn out that one of my wires was loose.
Also if the little switch on the back is not switch to the correct setting the timer won't stay on.
Also if the little switch on the back is not switch to the correct setting the timer won't stay on.
#6
There should be three heavy gauge wires
1: Constant 12 volt supply
2: Ignition source
3: Accessory Sorce
For your vehicle you will connect to the follow factory color wires (off the ignition switch, same order as above)
1. White
2. Black/Yellow
3. Yellow
If you want more descriptive instructions you will have to post the exact type of turbo timer you have.
1: Constant 12 volt supply
2: Ignition source
3: Accessory Sorce
For your vehicle you will connect to the follow factory color wires (off the ignition switch, same order as above)
1. White
2. Black/Yellow
3. Yellow
If you want more descriptive instructions you will have to post the exact type of turbo timer you have.
Sorry about that its a Greddy Full Auto TImer
#7
recheck your wiring... I had the same problem with mine when I first installed it. The timer would turn on when the car was on but it will not stay on for the count down. Turn out that one of my wires was loose.
Also if the little switch on the back is not switch to the correct setting the timer won't stay on.
Also if the little switch on the back is not switch to the correct setting the timer won't stay on.
does it turn on by itself? I have to push the power to turn it off.
I tried switching the wire around a little but with no luck.
I will take a look at the switch on the back today.
Thanks for the info
#9
I'm thinking maybe the turbo timer is messed up?
#10
double check your connections and test the wires with a multi-meter. Ignition should hold voltage during crank and accessory should drop voltage during crank.
If everything is hooked correctly and to specs then its probably a faulty timer.
If everything is hooked correctly and to specs then its probably a faulty timer.
Thread
Thread Starter
Forum
Replies
Last Post
se7ensectoolate
ECU Tuning & Fuel Management
16
04-25-2005 10:40 AM
ZzZzz EH2
PRIVATE For Sale / Trade Classifieds
0
06-01-2004 03:06 PM