Viper 5002 … H2 Auxiliary help?
#1
Viper 5002 … H2 Auxiliary help?
1998 Honda Civic EX Sedan 5-Speed
Viper 5002 alarm system
H2/1 LIGHT BLUE (-) Second Unlock
H2/2 GREY (-) Hood Pin Input, Zone 6
H2/3 ORANGE/BLACK Retained Accessory Output
H2/4 GREY/BLACK (-) Channel 6 Output
H2/5 WHITE/BLACK (-) Channel 5 Output
H2/6 VIOLET/BLACK (-) Channel 4 Output
H2/7 LIGHT BROWN (-) Horn Honk Output
H2/8 LIGHT GREEN/BLACK (-) Factory Disarm Output
Someone please help me figure this out below?
This is what I have so far:
H2/1 ??
H2/2 to hood pin (18 gauge)
H2/3 ??
H2/4 ??
H2/5 ??
H2/6 ??
H2/7 to Horn BLUE/GRAY (does this causes the horn to go off if alarm is triggered?)
H2/8 ??
I did want to be able to press once to unlock drivers door, second press to unlock all other doors.
Thanks for any help or advice!!
-Joseph
Viper 5002 alarm system
H2/1 LIGHT BLUE (-) Second Unlock
H2/2 GREY (-) Hood Pin Input, Zone 6
H2/3 ORANGE/BLACK Retained Accessory Output
H2/4 GREY/BLACK (-) Channel 6 Output
H2/5 WHITE/BLACK (-) Channel 5 Output
H2/6 VIOLET/BLACK (-) Channel 4 Output
H2/7 LIGHT BROWN (-) Horn Honk Output
H2/8 LIGHT GREEN/BLACK (-) Factory Disarm Output
Someone please help me figure this out below?
This is what I have so far:
H2/1 ??
H2/2 to hood pin (18 gauge)
H2/3 ??
H2/4 ??
H2/5 ??
H2/6 ??
H2/7 to Horn BLUE/GRAY (does this causes the horn to go off if alarm is triggered?)
H2/8 ??
I did want to be able to press once to unlock drivers door, second press to unlock all other doors.
Thanks for any help or advice!!
-Joseph
#2
For a basic install, you can leave all of those disconnected. I would suggest you hook up the basics first and get it working in some form, then come back and add more features.
It sounds like H2/1 would go to the passenger door(s) to do a two-stage unlock, but I'd have to RTFM to be sure.
It sounds like H2/1 would go to the passenger door(s) to do a two-stage unlock, but I'd have to RTFM to be sure.
#3
For a basic install, you can leave all of those disconnected. I would suggest you hook up the basics first and get it working in some form, then come back and add more features.
It sounds like H2/1 would go to the passenger door(s) to do a two-stage unlock, but I'd have to RTFM to be sure.
It sounds like H2/1 would go to the passenger door(s) to do a two-stage unlock, but I'd have to RTFM to be sure.
On H2/1 you are right...I was told I need to relay to get it to work. I will bypass that option for now and just get it up and running.
Thanks very much!!
Thread
Thread Starter
Forum
Replies
Last Post
Karado58
Mechanical Problems & Technical Chat
10
10-04-2009 04:26 PM
Karado58
Mechanical Problems & Technical Chat
6
09-30-2009 10:55 AM