I used the DIY CEL check and came up with six long blinks and one short.......so that's 61. Now where do I go? I'm sure I've got an OBDII, but the Chilton's manual is all P####. Can anyone give my number a name? Thanks!!!

 

Go to Advanced Auto if there is one near you, they will pull the code for free.

 

Can't. I tried all the auto places around here. They all say that there is something wrong with the ECU connector (where you plug the machine into). There was no power going to the plug or something.

 

primary O2 sensor slow response.

 

Cuz it's cold? How would I fix that?

 

Check Engine Light (CEL), what do I do?: http://www.c-speedracing.com/faq/03.php
Check your Check Engine Light (CEL): http://www.c-speedracing.com/faq/06.php
Define your Check Engine Light (CEL): http://www.c-speedracing.com/faq/05.php
Resetting DelSol's ECU: http://www.austrosol.com/tips/reset_ecu_eng.htm


all courtesy of xcm828...... found in the general tech help section here at hcf

 

Is that something to do with the cold, or is it something I will have to fix/replace?

 

there really is not anything serviceable on an o2 sensor, they cost about 26 bucks for a universal and about 45 bucks for oem

[IMG]local://upfiles/1438/FD9EA633A47F4BEE949C091C44D2C234.jpg[/IMG]