aftermarket cam
#2
RE: aftermarket cam
use a b16 head they flow the same as the ITR b/c they were both made on the same casting line from the factory but the ITR has more refinements done toit
do a stage 1 cam on stock valvesprings ifyou want to keep it below 9K rpm valve springs and retainers if you want to go above that
do a stage 1 cam on stock valvesprings ifyou want to keep it below 9K rpm valve springs and retainers if you want to go above that
Thread
Thread Starter
Forum
Replies
Last Post
99silverSI
Engine & Internal
2
08-25-2007 09:43 PM