ENGINE BUILD FINALLY DONE! New pics ADDED
#1
ENGINE BUILD FINALLY DONE! New pics ADDED
It's DONE, FINALLY!! My d series build is finally complete and ready to drop in.
D16z6 head-Port matched on intake side, Skunk2 Retainers/Valve Springs Etc. Skunk2 Stage II Cam, ARP Headstuds, Skunk2 Intake Manifold.
D16y8 Block- Decked, Block Gaurd, Wiseco Forged Pistons 8:6:1 .020 over, Eagle H-Beam Rods.
I'm so excited you don't even know, I haven't driven my civ for over 6 months now! I'll have some pics up tuesday night after I pick it up, and more pics to follow during the re-install, and the turbo install.
D16z6 head-Port matched on intake side, Skunk2 Retainers/Valve Springs Etc. Skunk2 Stage II Cam, ARP Headstuds, Skunk2 Intake Manifold.
D16y8 Block- Decked, Block Gaurd, Wiseco Forged Pistons 8:6:1 .020 over, Eagle H-Beam Rods.
I'm so excited you don't even know, I haven't driven my civ for over 6 months now! I'll have some pics up tuesday night after I pick it up, and more pics to follow during the re-install, and the turbo install.
#4
RE: ENGINE BUILD FINALLY DONE!
I wanna know how much everything ran you minus the labor (except sleeving). I wanna do the same setup but with a GSR. I'm especially interested in knowing how much the P&P ran you b/c i haven't gotten any clear numbers on that, but i want a full P&P (not sure if thats what u got). But yea, that thing is gonna rip the track up.
#6
RE: ENGINE BUILD FINALLY DONE!
That is a wicked D right there. Congrats on finally getting it back. My car has been stolen for 2 weeks, and I can barely handle myself, I cant imagine what 6 months would be like.
I too am curious about the P&P price, and Im also wondering how important you guys think it is in the overall building of the engine?
I too am curious about the P&P price, and Im also wondering how important you guys think it is in the overall building of the engine?
#8
RE: ENGINE BUILD FINALLY DONE!
My personal philosophy on modding is that i would rather spend some extra money doing things that won't give me anything in the short run but will pay off in the long run. Taking a motor apart and putting in new pistons, rods, and sleeves isn't gonna give me any performance, in fact, the low comp pistons are gonna hurt my performance. So ill end up driving a car that is slower for a couple of months. But when i get a turbo at a later point, ill be able to up the boost really high. I figure that its worth to wait a little bit and end up with big gains instead of goin for the quickest, cheapest way to make less power. But what ive realized from the research that ive done so far is that its gonna cost me alot of money to do it. Right now, it looks like the build is gonna run me in the 6k range, thats w/o a turbo.
#9
RE: ENGINE BUILD FINALLY DONE!
ORIGINAL: AgentofDarkness
Right now, it looks like the build is gonna run me in the 6k range, thats w/o a turbo.
Right now, it looks like the build is gonna run me in the 6k range, thats w/o a turbo.
#10
RE: ENGINE BUILD FINALLY DONE!
I think that 6K is doable. Ill list the mods and prices.
GSR motor: 3k to my house.
Rods: $400
Pistons: $400
Stage II CLutch: $400
Sleeving: $800
Head Studs: $200
Head Gasket: $200
Mounts: $400
Total: $5800.
Anything i am missing or corrections? Of course there are other things that i haven't included that i prolly should such as a p&p, valves, springs, retainers, valve job, cams. But it isn't too hard to take the head off once its on the car, the rest of the stuff is gonna be a PITA to change once the motor is in.
GSR motor: 3k to my house.
Rods: $400
Pistons: $400
Stage II CLutch: $400
Sleeving: $800
Head Studs: $200
Head Gasket: $200
Mounts: $400
Total: $5800.
Anything i am missing or corrections? Of course there are other things that i haven't included that i prolly should such as a p&p, valves, springs, retainers, valve job, cams. But it isn't too hard to take the head off once its on the car, the rest of the stuff is gonna be a PITA to change once the motor is in.