Engine & Internal Chat about beefing up your engine's insides here.

Replacing stock engine

Thread Tools
 
Search this Thread
 
  #11  
Old 09-05-2008, 12:02 PM
BigDadE84's Avatar
Junior Member
Thread Starter
Join Date: Sep 2008
Posts: 8
Default

Right on everyone. The info is reallly gonna help me. One MORE question though. My EX is an AUTO(lame), I want to know if it's possible to swap in a 2003 S-2000 engine and tranny(manual) into my civic. What are some of the components I am gonna have to remove?? I have a great price on an S-2000engine and tranny.
 
  #12  
Old 09-05-2008, 12:19 PM
bcivic's Avatar
HCF Member
Join Date: Aug 2007
Location:
Posts: 260
Default

S2000 engines are rear wheel drive. It is possible but with lots no tons of fabrication I dont suggest it. Just get a manual tranny for your car and swap it that is much much easier than swapping an s2k motor in and if you want boost might as well get lsd in the tranny at the same time.
 
  #13  
Old 09-05-2008, 01:32 PM
BigDadE84's Avatar
Junior Member
Thread Starter
Join Date: Sep 2008
Posts: 8
Default

Ok. Thanx. That is good to know. Guess i'll use the money on my stock engine. Do you have any sugestions on really improving the acceleration on an auto tranny??
 
  #14  
Old 09-05-2008, 05:14 PM
Ozone's Avatar
HCF Member
Join Date: Aug 2008
Location: Tampa, FL
Posts: 52
Default

A good torque convertor is a great place to start, especially if you plan on boosting it. Not sure about any valve body, or computer component upgrades on these lil trans.... Now....if it was a TH350 or 400, or a c4 or c6, or even a TF727 I'd know aaalll about it lol...
 

Last edited by Ozone; 09-05-2008 at 05:15 PM. Reason: cuz I'm a retard and cant type or spell.
  #15  
Old 09-05-2008, 05:18 PM
trustdestruction's Avatar
Moderator
Join Date: May 2007
Location: FL
Posts: 11,417
Default

Originally Posted by Ozone
A good torque convertor is a great place to start, especially if you plan on boosting it. Not sure about any valve body, or computer component upgrades on these lil trans.... Now....if it was a TH350 or 400, or a c4 or c6, or even a TF727 I'd know aaalll about it lol...
For the price of a good torque converter (i.e. ZEX), he could do a manual swap. It'd be just about the same amount of work.
There's no point in upgrading the torque converter when the same amount of money would get you a manual swap.


But anyway, if your car is stock BigDadE84 and you haven't made really any investments in it, it would be more cost effective to just sell it and find another 92-95 EX that already has a manual transmission. I used to have an automatic, but it wasn't worth doing the swap when I could just sell it and get a manual for pretty much free overall.
 
  #16  
Old 09-06-2008, 02:51 PM
stevos99civic's Avatar
Junior Member
Join Date: Sep 2008
Posts: 2
Default

im going to have to agree with v8diet, the B18c5 is probably the easiest swap, ive been looking into it myself and found out you can go with b16a2 which is a little cheepier. But, i dont think its worth it, im going with the b18c5 and they were running about 3000-5000. full kit came with ecu, motor,trans, harness, pretty much everything you need out of the old car. look on tokyomotors.com
 
  #17  
Old 09-07-2008, 05:26 AM
V8DIET's Avatar
HCF Member
Join Date: Feb 2007
Location: Cincinnati
Posts: 631
Default

+1 ^^ If you have 5K to play with I'd find a b18 with like 60+K on it or around there for like 3000-4000 than with the extra $ build the internals to be bullet proof. then later on down the road you can boost the hell out if it no prob. :-)
 
  #18  
Old 09-07-2008, 06:37 PM
bcivic's Avatar
HCF Member
Join Date: Aug 2007
Location:
Posts: 260
Default

type r's are way to much money Imo. b16a would be the way to go they are almost half the price and only 15 hp less. but if you have the money go ahead I guess. I still say build your current motor and get a manual tranny convert it boost it tune it and you will have a very fun fast car and you will learn alot along the way.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Erad
Audio/Visual & Electronics
4
03-01-2009 09:23 PM
capn_midnight
Header, Intake, & Exhaust
10
08-31-2006 04:07 PM
capn_midnight
The Lounge
0
08-23-2006 02:05 PM
rrb32
Audio/Visual & Electronics
6
09-23-2005 03:22 AM
89civiclx
Suspension, Brakes, Tires & Wheels
5
02-08-2005 10:12 PM



Quick Reply: Replacing stock engine



All times are GMT -8. The time now is 11:28 AM.