Installed my megan front lower tie bar and ASR Brace with the sway bar.

I'm almost burnt out on doing anything else to my car and luckily there's really nothing else I want to do to it.

 

took my sisters car antenna and put it in mines since mines wasnt long enough and there was no way of connecting it. so now i got radio. i also just purchased some jdm
eg9 corner lights. they'll be coming in on the day i leave to florida so wont put them in til i get back.

 

In the past couple of weeks or so;

• Replaced wiper motor
• Had new speakers installed all around
• Had foam baffles installed on the door speakers to keep them dry
• Installed some AVS vent visors to reduce wind noise, and make winter time smoking more enjoyable

 

lol you must be the first person on HCF to use bullets in a post

 

^ bullet pointing looks clean

installed my RSX windshield washer nozzles. got some sandpaper and wheel polish. going to be polishing the lip on my hx rims.

 

Where'd you get the nozzles? I wanted to do that mod too.

 

http://www.acuraoemparts.com/delray/jsp/home.jsp

and here is a link to someone that did it with pics

http://www.lukekailburn.com/ddupgrade.html

 

Excellent idea, I'll have to add that to the list. As bad as the Civic ones are, my 4runner ones are even worse, been meaning to upgrade them for years.

 

stuart aka trustdestruction gave me the idea to do this mod. he also did this on his sol

 

haha yea... except I messed mine up a little.

DO NOT, I repeat, DO NOT try to adjust them. They are kinda stiff and are made to be adjusted, but once you move them just to try to get them down a little you'll never get them aligned the way you want and you'll keep trying until eventually part of the plastic on the nozzle will break. lol... looks like i'll be ordered more soon.

if you do this mod, you'll need some 1/4" vinyl tubing (or the Acura RSX washer hoses), because yours will not be long enough since the port on the nozzle goes straight down instead of off to the side.
For pics of what I mean, look in my project thread, i'm about to post some.