Seafoaming Redline or no redline?
Thread Starter
|
HCF Member
Joined: Mar 2010
Posts: 47
From: Lynn, MA
1/3 in gas
1/3 in oil
1/3 through through brake booster line
let sit for 20 min. then drive very hard until smoke stops coming out. then change oil and spark plugs.
works great, not at all as intimidating as i thought it would be.
going to try seafoam trans-tune next.
1/3 in oil
1/3 through through brake booster line
let sit for 20 min. then drive very hard until smoke stops coming out. then change oil and spark plugs.
works great, not at all as intimidating as i thought it would be.
going to try seafoam trans-tune next.
HCF Member
Joined: Mar 2009
Posts: 689
From: Plattsburgh, NY
well all the black stuff coming out of your car is carbon build up from your engine, and it will gunk up your spark plugs and o2 sensor as a result of expelling it. you should either put in a spare crappy set of spark plugs before you seafoam, or change them after.
as for the o2 sensor, i got a CEL a few days after seafoaming, but eventually it went away as the carbon burnt off of it.
as for the o2 sensor, i got a CEL a few days after seafoaming, but eventually it went away as the carbon burnt off of it.
Thread
Thread Starter
Forum
Replies
Last Post
