Sov's Build FINISHED 5/19 (pics pg 14)
HCF Member
Joined: Nov 2006
Posts: 1,282
From:
RE: Sov's Build
a pretty good bit....but hes buying most everything new....it could be done cheaper...but thats a DAMN good quality build...cant wait to see install pix, and of course, dyno runs/highway pulls!
Good work sov, keep it up!
Good work sov, keep it up!
HCF Member
Joined: Jan 2005
Posts: 11,248
From: Charleston
RE: Sov's Build
No offense Remmy, but that's a rather ignorant statement.
First of all, you're on a Greddy kit with a Bseries and S20 trans, of course you're not going to fall out of boost between shifts. You spool early and you have much tighter gear ratios than a stock Dseries.
Second of all, when you full spool at 5000 in 4th gear you will fall out of boost with a stock Dseries transmission and 7200 redline. Simple gearing dynamics, the car will fall to 4500rpms in each shift whether you have a lightning fast shift or not, there is no way around it beyond increasing the redline, regearing the transmission, or both.
[/quote]
Good point. I didnt think of that. FTR, ive never claimed to be the master mech around here.
Touche
Thread Starter
|
Senior Member
Joined: Jun 2006
Posts: 1,913
From: Harleysville, PA
RE: Sov's Build
ORIGINAL: Remmy
Good point. I didnt think of that. FTR, ive never claimed to be the master mech around here.
Touche
Good point. I didnt think of that. FTR, ive never claimed to be the master mech around here.
Touche
Well let's see, this is about what everything cost me. These aren't exact prices that's for sure, I don't remember half of them (and don't really care to lol).
Engine:
Compete D16Z6 - $50
Vitara pistons (rings, clips, wrist pins included) - $150
Eagle Rods - $300
Rod and Main bearings - $200
Miscellaneous engine stuff - $100 (gaskets, pumps, etc)
Zex Cam - $200
Zex Valve Springs - $150
ARP Head Studs - $90
~$1200
Tranny:
OBX LSD - $350
Gears - $90
Bearings - $100
~$550
Turbo Kit
Turbo - $550
Ramhorn Mani - $400
Downpipe/Dumptube Material - $100
ICpiping - $150
Intercooler - $200
BOV - $150
Wastegate - $250
Boost Controller - $330
Exhaust - $500
GM 3bar MAP Sensor - $70
~2700
Fuel/Tuning
Precision 780cc injectors - $280
Walbro 255lhp - $100
P28 chipped with harness - $270ish
~650
Oh good lord, around $5000, there's more than what I have there but that's the basics.
HCF Member
Joined: Jan 2005
Posts: 11,248
From: Charleston
RE: Sov's Build
ORIGINAL: SovXietday
No worries, it's one of those things you have to experience to understand ya know?
Well let's see, this is about what everything cost me. These aren't exact prices that's for sure, I don't remember half of them (and don't really care to lol).
Engine:
Compete D16Z6 - $50
Vitara pistons (rings, clips, wrist pins included) - $150
Eagle Rods - $300
Rod and Main bearings - $200
Miscellaneous engine stuff - $100 (gaskets, pumps, etc)
Zex Cam - $200
Zex Valve Springs - $150
ARP Head Studs - $90
~$1200
Tranny:
OBX LSD - $350
Gears - $90
Bearings - $100
~$550
Turbo Kit
Turbo - $550
Ramhorn Mani - $400
Downpipe/Dumptube Material - $100
ICpiping - $150
Intercooler - $200
BOV - $150
Wastegate - $250
Boost Controller - $330
Exhaust - $500
GM 3bar MAP Sensor - $70
~2700
Fuel/Tuning
Precision 780cc injectors - $280
Walbro 255lhp - $100
P28 chipped with harness - $270ish
~650
Oh good lord, around $5000, there's more than what I have there but that's the basics.
ORIGINAL: Remmy
Good point. I didnt think of that. FTR, ive never claimed to be the master mech around here.
Touche
Good point. I didnt think of that. FTR, ive never claimed to be the master mech around here.
Touche
Well let's see, this is about what everything cost me. These aren't exact prices that's for sure, I don't remember half of them (and don't really care to lol).
Engine:
Compete D16Z6 - $50
Vitara pistons (rings, clips, wrist pins included) - $150
Eagle Rods - $300
Rod and Main bearings - $200
Miscellaneous engine stuff - $100 (gaskets, pumps, etc)
Zex Cam - $200
Zex Valve Springs - $150
ARP Head Studs - $90
~$1200
Tranny:
OBX LSD - $350
Gears - $90
Bearings - $100
~$550
Turbo Kit
Turbo - $550
Ramhorn Mani - $400
Downpipe/Dumptube Material - $100
ICpiping - $150
Intercooler - $200
BOV - $150
Wastegate - $250
Boost Controller - $330
Exhaust - $500
GM 3bar MAP Sensor - $70
~2700
Fuel/Tuning
Precision 780cc injectors - $280
Walbro 255lhp - $100
P28 chipped with harness - $270ish
~650
Oh good lord, around $5000, there's more than what I have there but that's the basics.
HCF Member
Joined: Oct 2006
Posts: 1,897
From:
RE: Sov's Build
ORIGINAL: Remmy
What was the power you were expecting from this? Whatever it is im a little concerned. I dont see any motor cooling in that list. At the least grab a big *** radiator from fluidyne or something.
ORIGINAL: SovXietday
No worries, it's one of those things you have to experience to understand ya know?
Well let's see, this is about what everything cost me. These aren't exact prices that's for sure, I don't remember half of them (and don't really care to lol).
Engine:
Compete D16Z6 - $50
Vitara pistons (rings, clips, wrist pins included) - $150
Eagle Rods - $300
Rod and Main bearings - $200
Miscellaneous engine stuff - $100 (gaskets, pumps, etc)
Zex Cam - $200
Zex Valve Springs - $150
ARP Head Studs - $90
~$1200
Tranny:
OBX LSD - $350
Gears - $90
Bearings - $100
~$550
Turbo Kit
Turbo - $550
Ramhorn Mani - $400
Downpipe/Dumptube Material - $100
ICpiping - $150
Intercooler - $200
BOV - $150
Wastegate - $250
Boost Controller - $330
Exhaust - $500
GM 3bar MAP Sensor - $70
~2700
Fuel/Tuning
Precision 780cc injectors - $280
Walbro 255lhp - $100
P28 chipped with harness - $270ish
~650
Oh good lord, around $5000, there's more than what I have there but that's the basics.
ORIGINAL: Remmy
Good point. I didnt think of that. FTR, ive never claimed to be the master mech around here.
Touche
Good point. I didnt think of that. FTR, ive never claimed to be the master mech around here.
Touche
Well let's see, this is about what everything cost me. These aren't exact prices that's for sure, I don't remember half of them (and don't really care to lol).
Engine:
Compete D16Z6 - $50
Vitara pistons (rings, clips, wrist pins included) - $150
Eagle Rods - $300
Rod and Main bearings - $200
Miscellaneous engine stuff - $100 (gaskets, pumps, etc)
Zex Cam - $200
Zex Valve Springs - $150
ARP Head Studs - $90
~$1200
Tranny:
OBX LSD - $350
Gears - $90
Bearings - $100
~$550
Turbo Kit
Turbo - $550
Ramhorn Mani - $400
Downpipe/Dumptube Material - $100
ICpiping - $150
Intercooler - $200
BOV - $150
Wastegate - $250
Boost Controller - $330
Exhaust - $500
GM 3bar MAP Sensor - $70
~2700
Fuel/Tuning
Precision 780cc injectors - $280
Walbro 255lhp - $100
P28 chipped with harness - $270ish
~650
Oh good lord, around $5000, there's more than what I have there but that's the basics.
400+ on Racing gas.
Says on the front page.
