Ok I managed to do a front end conversion and a dash conversion and getting started on a tail light conversion so you figured I could install a simple set of door poppers right?? HA yeah right is more like it!! I got the kit in yesterday and looking at the instructions I realized they dont tell me CRAP!!!! So I know how to wire them, that's the easy part. They dont tell anything about how to mount the solenoids or the poppers.

Does anyone have a link to somewhere that will give me detail instruction on this??

Remy I'm counting on you for this one!

 

anybody?

 

if you are thinking about shaving your handles DON'T!!!!!! I had mine done and it has been nothing but problems ever since. Everyone I have talked to that has done it wishes they hadn't. I am saving up just to change them back.

 

door popers are a pain and a half, ...ok heres a ? ..what happens when the remote batt goes dead..ur stuck, its also a pain to shave off the handles, and a waste of money in my book.

 

I have shaved door handle the best thing to do is get actuator to lock and unlock your door and install a push popper to open the door Cut and bend the metal for the door handle and make a button to push for it to open. I dont know how to explain it really ill get pics. But actuators are the way to go. they are easy to install and cheap if you need to replace. About 16 bucks an actuator. An for gettin the door open juss install a back up cable that you only know where it is that opens the door thats what i have.
If you have ne more questiions juss ask josh