01 DX no clutch pressure
#1
01 DX no clutch pressure
Hi, all, I know this has probably been covered a million times, but I have an 01 dx coupe. I recently replaced both the clutch master and slave cylinders, and still cant seem to get any pressure o the pedal. the master was installed by a mechanic, and bench bled before it was installed. I installed the slave myself. it seems no matter what I do, I still have no pressure whatsoever in the clutch line. I attempted gravity bleeding, nothing seems to come through the line whatsoever. I tried pumping the pedal and using the bleeder, no pressure buildup at all. this is the third master I have had put in the car, same issue. no matter what I do it seems as though I cannot get this system to bleed whatsoever. the mechanic checked the lines and said they are all ok. I have also adjusted the master all the way in and all the way out with no effect. does anyone have any idea as to what I am doing wong here? I have done this procedure on several cars over the years, and this is the only one ive ever had this kind of issue with. both the master and slaves are oem. any help or suggestions would be greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
lunger
Mechanical Problems & Technical Chat
1
07-10-2011 02:50 PM
okotokssteve
Mechanical Problems & Technical Chat
3
04-16-2010 06:07 AM
phan10m
Mechanical Problems & Technical Chat
3
07-07-2007 04:27 PM