Mechanical Problems & Technical Chat If you've got a problem you just can't figure out, a noise you can't diagnose, or a check engine light that won't go away, ask about it here!

1991 Civic questions

Old May 21, 2006 | 10:24 AM
  #1  
bw1339's Avatar
Thread Starter
|
HCF Member
Joined: Nov 2005
Posts: 43
Default 1991 Civic questions

Hello,
My 91 Civic DX has always needed a bit of gas when starting cold, or it would take a lot of cranking to start (cold only). The engine starts fine when warm - No gas needed. My Haynes manual mentions a "cold start injector", but doesn't give any more information. Does my car have this, and could this be the problem?

My other question - The exhaust in my car smells a bit rich and gas mileage is about 37MPG, vs the 43 it used to get. The O2 sensor is new (a universal one) and I'm wondering if the computer is going into closed loop at all when the engine warms up. What triggers this change, one of the temperature sensors under the distributor? The engine's idle drops a bit when warm, specially when the alternator is under load, but it is stable and doesn't fluctuate, so I'm assuming the idle control valve is doing its job.

Any input would be greatly appreciated.

Thanks,
Mikel
 
Old May 22, 2006 | 12:00 PM
  #2  
Mad7s's Avatar
HCF Member
Joined: Sep 2004
Posts: 1,607
From: San Diego
Default RE: 1991 Civic questions

My 91 Civic DX has always needed a bit of gas when starting cold, or it would take a lot of cranking to start (cold only). The engine starts fine when warm - No gas needed. My Haynes manual mentions a "cold start injector", but doesn't give any more information. Does my car have this, and could this be the problem?
Yes, it does. Those things where out after years of use. My Camry's cold start injector was garbage and I had to do the exact same thing as you to start it in the winter. Try getting a new one. If you install it yourself it's not that expensive.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jw1983
General Civic Talk
1
May 20, 2014 07:55 PM
alanking80
Mechanical Problems & Technical Chat
6
Apr 30, 2012 03:37 PM
WILMER007
General Civic Talk
4
Dec 24, 2008 11:46 PM
oldguy
New Member Introductions
1
Mar 17, 2007 01:03 PM
Msjessica
Header, Intake, & Exhaust
6
Jan 15, 2006 04:45 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 11:24 PM.