2012, blender door/ AC issue
Thread Starter
|
Junior Member
Joined: Feb 2012
Posts: 21
2012, blender door/ AC issue
2012 4door ex.
Ac blows cold, the problem is that the air coming out of the vent isn't very powerful. It is as if the blower motor was only blowing at half speed.
So i thought there might be a clog, there isn't any clog that i can find.
Next i figure out that when you press the recirculation button, nothing happens, i don't hear the door close, and the air coming out of the vent isn't getting any stronger. Any one have a picture of what im looking to replace?
Ac blows cold, the problem is that the air coming out of the vent isn't very powerful. It is as if the blower motor was only blowing at half speed.
So i thought there might be a clog, there isn't any clog that i can find.
Next i figure out that when you press the recirculation button, nothing happens, i don't hear the door close, and the air coming out of the vent isn't getting any stronger. Any one have a picture of what im looking to replace?
Thread
Thread Starter
Forum
Replies
Last Post
Mad_Jasper
HCF Suggestion / Forum Help Center
2
Feb 14, 2026 03:06 AM
mudhenFUF
Mechanical Problems & Technical Chat
8
Jan 16, 2023 08:43 PM
ashu
Mechanical Problems & Technical Chat
0
Aug 8, 2010 08:52 AM
MBrent
General Civic Talk
10
Sep 11, 2009 01:35 PM
