Code P1381 cylinder position
Thread Starter
|
Junior Member
Joined: Sep 2008
Posts: 7
Code P1381 cylinder position
I having the CEL light on and the code is P1381. From what I could find, I need to change my crank position sensor. Is this where it is?
Plugs in where the top arrow is... Goes to the bottom of the engine sensor bolts in there?
Any help is appreciated...
Plugs in where the top arrow is... Goes to the bottom of the engine sensor bolts in there?
Any help is appreciated...
p1381 is in the lil yellow wire in your distributor my friend 
this i know.. i replaced my timing belt and crank shaft pos. sensor n had the same code..this is when your car gets hot n shuts off automatically n wont start till it cools down.
this i know.. i replaced my timing belt and crank shaft pos. sensor n had the same code..this is when your car gets hot n shuts off automatically n wont start till it cools down.
Last edited by Honda6450; Apr 6, 2011 at 06:43 PM.
Recognized HCF Member
Joined: Jun 2007
Posts: 10,023
Like the other guy said, the CYP is inside the distributor. The sensor on the crankshaft is the CKF sensor. The 1996 system still uses the distributor for all spark and injection timing. The crank sensor is used only to detect a skipped timing belt.
Thread
Thread Starter
Forum
Replies
Last Post
lindylex
Mechanical Problems & Technical Chat
2
Apr 21, 2015 08:38 PM
